MGY-100BL Hydraulic anchor drilling rig crawler drilling rig

MGY-100BL crawler Hydraulic anchor drilling rig is new generation of hight-efficient hydraulic anchor drilling rig developed based on our MGY-100A and MGY-100B anchor drilling rig which are split-type of anchor drilling rig, can be widely used in the field of municipal construction deep excavation, bolt and cable construction, pipe roof construction, jet grouting hole and so on.

• High construction efficiency. As the rig uses a hydraulic chuck with large inner hole, a fixture 6m drill rod in one time, to reduce the numbers of adding and screw-off drill rod and improve the effective working time.

• As a result of crawler chassis drive, and the rig mast down or up of position adjustment of 400mm. Hole position adjustment time is greatly reduced.

• The rig has a holder, shackle device. Through cooperation with the operation of the power head chuck, to reduce the operator's labor intensity.

• The rig adapt to a wide processes. As the rig has a hydraulic chuck with inner hole diameter of Φ110 mm . No need to make any alteration of top-drive head, you can adapt a single tube, double tube, three tube to make jet-grouting, reverse circulation drilling and Φ108 pipe-roof construction.

 

Specifaction

1	Theory hole diameter	Φ110 ~ Φ400
2	theory drilling depth	150 ~ 40 m
3	hole angle range	-20 °~ 90  °
4	drill rod	Φ89,Φ73,Φ89
		hexagonal drill rod:Φ89x79;Φ70x63
5	Max.torque of top-drive head	6500  Nm
6	rotation speed of top-drive head	1:35,70.r/min;  2:70,140(r/min)
7	feed/lifting speed	0-0.5m/s
8	pulling/pushing force	80 / 57kN
9	Max. feed stroke	1900mm+3200mm+1100mm=6200mm
10	height of rotation center	Max.2150mm,Min.1750mm, height differential 400mm
11	gripping and screw-off device	Φ120
		240KN,18KNm.
12	power unit	electric motor/diesel engine: 30kw
13	climbing angle	30 º
14	crawling speed	1.95Km/h
15	whole weight