22CrV4 is a kind of alloy structural steel . strength, toughness are higher than 20Cr steel, high surface hardness after hardening, good toughness, low hardenability.
22CrV4 Correspond steel:
AISI 6120,GB 20CrV
22CrV4 chemical composition(％):
C: 0.17 ~ 0.23
Si : 0.17 ~ 0.37
Mn: 0.50 ~ 0.80
Cr: 0.8～1.1
V:0.10～0.20
22CrV4 Mechanical Properties:
Tensile strength σb (MPa): ≥835
Yield strength σs (MPa): ≥590
Impact energy Akv (J): ≥55
Round bar : Diameter : 1mm-2000mm
Square bar :Size: 50mm * 50mm～600mm *600mm
Plate steel/flat bar :Size: Thickness: 0.1mm～800mm Width: 10mm to 1500mm
Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
22CrV4 Application:
20CrV for surface requiring high hardness and wear resistance, the center section has greater strength and not a very big carburizing parts such as gears, piston pin, a small shaft distribution shaft, ram, valve push rod and steam turbine heat nut and washer, non-corrosive media work under high pressure pipelines 300 ~ 500 ℃ work .We serve you with our honesty, integrity, and professionality .
Contact sales:
Website : http://www.firsteelplate.com/
Email : seedsteel@hotmail.com
Tel : +86-371-55031185
Fax: +86-371-86220366
