42CrMo4 steel is ultra high strength steel, high strength and toughness, hardenability better, no temper brittleness, after quenching with high fatigue limit and several anti-shock, good low-temperature impact toughness.
42CrMo4 Correspond steel:
AISI 4140,JIS SMn440,GB42CrMo
42CrMo4 chemical composition(％):
C: 0.38 ~ 0.45
Si : 0.17 ~ 0.37
Mn: 0.50 ~ 0.80
S: to allow the residual content of ≤0.035
P: allow the residual content ≤0.035
Cr: 0.9～1.2
Ni: to allow the residual content ≤0.030
Cu: to allow the residual content of ≤0.030
Mo: 0.15～0.25
42CrMo4 Mechanical Properties:
Tensile strength σb (MPa): ≥1080 (110)
Yield strength σs (MPa): ≥930 (95)
Elongation δ5 (%): ≥12
Impact energy Akv (J): ≥63
Round bar : Diameter : 1mm-2000mm
Square bar :Size: 50mm * 50mm～600mm *600mm
Plate steel/flat bar :Size: Thickness: 0.1mm～800mm Width: 10mm to 1500mm
Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
Application:
42CrMo4 alloy steel is used in the manufacture of non-corrosive medium and temperature lower than 250 ℃, high-pressure pipes and all kinds of fasteners medium containing a mixture of nitrogen and hydrogen to work, higher carburizing parts such as gears, shafts, etc .We serve you with our honesty, integrity, and professionality .
Contact sales:
Website : http://www.firsteelplate.com/
Email : seedsteel@hotmail.com
Tel : +86-371-55031185
Fax: +86-371-86220366
