powder coating furnace temperature tracker
STM-7 temperature tracker for painting and coatings
Measuring more points, good software ,completely remove the troubles
The SMT-7 system is the most reliable, easy to use and accurate in-process oven temperature profiling for the coating . For those who apply coatings, sell coatings, or need to know what is happening to their product inside a conveyorized or large batch oven, SMT-7 will be the best choice.
STM-7 Let you easy to measure, record and analyze artifacts in the curing oven and air temperature curve, ensure the coating to get fine quality, save time and save energy. The logger for measuring the temperature of the powder coatings and paints in the curing oven or the oven conveyor belt.
Number of Channels | 7-channel measuring external temperature, 1 channel measuring the internal temperature of instrument | ||||
Temperature measurement range | 0~500°C | Thermocouple | K | Memory | 128 K |
Resolution | 0.3°C | Accuracy | 0.5% | Instrument Size | Φ76 * 200 |
Temperature and time | continuous use under 200 °C about 120 minutes or continuous use under 300 °C about 60 minutes | ||||
Record Time | 7-channel full in 8 seconds record , can record 15 hours of data | ||||
Sampling rate | Sampling period:1s, 2s, 3s, 5s, 8s,10s,12s, 20s,40s, 60s | ||||
Cooler box size | 280(L) x 120(W) x 100 (H) | ||||
Set Software | 1) Each channel can select or deselect 2) When the calibration for each channel individually calibrated to ensure accuracy 3) Optional sampling period 4) Easy start / stop | ||||
Analysis Software | 1) Each curve optional display or not display; 2) Heating rate can be calculated at any temperature between the two; 3) can calculate above the temperature the four residence time; 4) Peak temperature can be calculated ; 5) 2-5 compare test data; 6) Report Print | ||||
