Battery material life performance test CT-4008-5V1mA
NEWARE 8 channel battery analyzer CT-4008-5V1MA-164 is 8 channel battery analyzer for battery material research,each channel of the analyzer has independent constant-current and constant-voltage source, which can be programmed and controlled by computer software. NEWARE 8 channel battery analyzer CT-4008-5V1MA-164 system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.
| BTS-5V1mA | Battery Testing System | |||||||||||||||
| Model: | BTS- | 5 | V | 1 | mA | Material Code: | - | - | ||||||||
| Description | Product Specification | |||||||||||||||
| AC Input | AC 110V±10% 50Hz | |||||||||||||||
| Power | 75 | mW | ||||||||||||||
| Resolution | AD: 16bit; DA: 16bit | |||||||||||||||
| Input Impedance | ≥1MΩ | |||||||||||||||
| Voltage | Measuring Range | Charge: 25mV~5V | Discharge: 25mV~5V | |||||||||||||
| Discharge Min Voltage | 10mV | |||||||||||||||
| Accuracy | ± 0.05% of FS | |||||||||||||||
| Stability | ± 0.05% of FS | |||||||||||||||
| Current | Range | Charge: 0.002mA~1mA Discharge: 0.002mA~1mA | ||||||||||||||
| Accuracy | ± 0.05% of FS | |||||||||||||||
| Stability | ± 0.05% of FS | |||||||||||||||
| Power | Output Power Per Channel | 5mW | ||||||||||||||
| Stability | ± 0.1% of FS | |||||||||||||||
| Time | Rise Time | 1ms (0~Full Range) | ||||||||||||||
| Step Time | ≤ (365*24) hour/step | Time Format 00:00:00:000 (h:min:s:ms) | ||||||||||||||
| Data Acquisition | Intervals | Time interval Δt:(100ms~60000s) | ||||||||||||||
| Voltage interval ΔU: (10mV~5V) | ||||||||||||||||
| Current interval ΔI: (0.002mA~1mA) | ||||||||||||||||
| Frequency | 10Hz | |||||||||||||||
| Charge | Modeof Operation | CCC, CVC, CC & CVC, CPC | ||||||||||||||
| End Conditions | Voltage, Current, Test Time, Capacity | |||||||||||||||
| Discharge | Modeof Operation | CCD, CPD, CRD | ||||||||||||||
| End Conditions | Voltage, Current, Test Time, Capacity | |||||||||||||||
| Pulse | Charge | CCC | ||||||||||||||
| Discharge | CCD | |||||||||||||||
| Min Pulse Width | 500ms | |||||||||||||||
| Automated Switch | Automated switch from charge to discharge for each pulse | |||||||||||||||
| End Condition | Voltage, Test Time | |||||||||||||||
| Cycle | Cycles | 65535 | ||||||||||||||
| Steps | 254 | |||||||||||||||
| Nested Function | Max three levels of loops | |||||||||||||||
| Protective Function | Software | ● Power-off data protection | ||||||||||||||
| ● Off-line Operating | ||||||||||||||||
| ● User-defined safety(upper and lower)tolerance of current, voltage and delay time | ||||||||||||||||
| Channel Features | Independent pairs of closed loop for constant current source and constant voltage source | |||||||||||||||
| Channels | Independent control | |||||||||||||||
| Detection and Sampling | 4-wire Connecting | |||||||||||||||
| Noise Density | <85dB | |||||||||||||||
| Data Management | MYSQL Database | |||||||||||||||
| Communication Means | TCP/IP Protocol | |||||||||||||||
| Export Formats | EXCEL, TXT, Graph | |||||||||||||||
| Communication Interface | Ethernet Port | |||||||||||||||
| Number of Channels Per Cabinet | 8 | |||||||||||||||
| Operating Environment | ||||||||||||||||
| Description | Product Specification | |||||||||||||||
| Operating Temperature | 0℃~40℃ | |||||||||||||||
| Storage Temperature | -10℃~50℃ | |||||||||||||||
| Operating Humidity | ≤70% RH | |||||||||||||||
| Storage Humidity | ≤80% RH | |||||||||||||||
Profile :
Neware Battery Testing System series is a general purpose, multi-channel battery testing system for Li-polymer, Li-ion, Ni-MH, Ni-Cd, etc, batteries. This system provides most applications in battery testing fields such as materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing, etc.
According to the international standard design, each channel of the system has an independent constant-current source and a hardware constant-voltage source. Constant-current source and constant-voltage source can be programmed and controlled as desired. In addition, an independent pulse source is added to each battery channel to meet with the requirements of dynamic internal resistance measurement.
Neware Battery Testing System series adopts module construction. With plug-and-play design, the user can freely remove and load the module units under a nonstop status without interrupting other module units' normal running. This function is convenient for the system's maintenance.
Performance
Each module provides 8 independent programmable channels
With built-in power supply, and complete controllable circuit, each module can work independently. Each channel can set different working modes. Channels are completely independent.
Fine programming characteristic
The system software can set working steps and working parameters, working modes of each step flexibly. Working modes includes constant current discharge, constant current charge, constant voltage charge, rest, GOTO, (internal resistance measurement). Each working modes can set voltage, current, time, capability, negative voltage slope, and other limit conditions, the relation of which is "logic or". When the present limit conditions are met, the system will continue next working mode automatically. The set program can be saved and opened in the form of Schedule.
Timely before sale service and after sale service :
1.Our purpose is to manufacture the most satisfied products and provide the most considerate service for every customer.
2.We will be glad to provide technical training for free if you are interested in our products. At any time, our engineers are ready for answering any of your questions about our products. If you are planning to buy our products, we may send some sample machines to your company first for your trial use free of charge. We sincerely welcome you to our company for a further understanding of our products.
3.We provide free maintenance during one year after the sales, and only charge for the cost after the guarantee period. We will constantly follow the status of our products by contacting our customers. Please also note that we will timely provide the latest upgraded software of our products to our customers all the time.
