NEWARE battery test equipment for testing battery capacity
This tester BTS-10v6a is a rang of high precision battery testing system, which designed primarily for Li-polymer, Li-ion, Ni-Ca, Lead acid etc. batteries combine capability tests.
Neware battery charg and discharge testing system according to the international standard design, each channel of the system has an independent constant-current source and a hardware constant-voltage source. Constant-current source and constant-voltage source can be programmed and controlled as desired. In addition, an independent pulse source is added to each battery channel to meet with the requirements of dynamic internal resistance measurement.
Neware Battery Testing System series adopts module construction. With plug-and-play design, the user can freely remove and load the module units under a nonstop status without interrupting other module units' normal running. This function is convenient for the system's maintenance.
Performance
Each module provides 8 independent programmable channels
With built-in power supply, and complete controllable circuit, each module can work independently. Each channel can set different working modes. Channels are completely independent.
Fine programming characteristic
The system software can set working steps and working parameters, working modes of each step flexibly. Working modes includes constant current discharge, constant current charge, constant voltage charge, rest, GOTO, (internal resistance measurement). Each working modes can set voltage, current, time, capability, negative voltage slope, and other limit conditions, the relation of which is "logic or". When the present limit conditions are met, the system will continue next working mode automatically. The set program can be saved and opened in the form of Schedule.
| BTS-5V10A | Battery Testing System | ||||||||||||||
| Model: | BTS- | 5 | V | 10 | A | Material Code: | CT-4008 | -5V10A | NA | - | P | ||||
| Description | Product Specification | ||||||||||||||
| AC Input | AC 380V±10% 50Hz | ||||||||||||||
| Power | 747 | W | |||||||||||||
| Resolution | AD: 16bit; DA: 16bit | ||||||||||||||
| Impedance Input | ≥1MΩ | ||||||||||||||
| Voltage | Measuring Range | Charge: 25mV~5V | Discharge: 25mV~5V | ||||||||||||
| Discharge Min Voltage | 1.8V | ||||||||||||||
| Accuracy | ± 0.1% of FS | ||||||||||||||
| Stability | ± 0.1% of FS | ||||||||||||||
| Current | Range | Charge: 50mA~10A Discharge: 50mA~10A | |||||||||||||
| Accuracy | ± 0.1% of FS | ||||||||||||||
| Stability | ± 0.1% of FS | ||||||||||||||
| Power | Output Power Per Channel | 50W | |||||||||||||
| Stability | ± 0.2% of FS | ||||||||||||||
| Time | Rise Time | 20ms (10%FS~90%FS) | |||||||||||||
| StepTime | ≤ (365*24) hour/step | Time Format 00:00:00:000 (h:min:s:ms) | |||||||||||||
| Data Acquisition | Intervals | Time interval Δt: (100ms~60000s) | |||||||||||||
| Voltage interval ΔU: (10mV~5V) | |||||||||||||||
| Current interval ΔI: (20mA~10A) | |||||||||||||||
| Frequency | 10Hz | ||||||||||||||
| Charge | Modes of Operation | CCC, CVC, CC & CVC, CPC | |||||||||||||
| End Conditions | Voltage, Current, Test Time, Capacity | ||||||||||||||
| Discharge | Modes of Operation | CCD, CPD, CRD | |||||||||||||
| End Conditions | Voltage, Current, Test Time, Capacity | ||||||||||||||
| Pulse | Charge | CCC | |||||||||||||
| Discharge | CCD | ||||||||||||||
| Minimum Pulse Width | 500ms | ||||||||||||||
| Automated Switch | Automated switch from charge to discharge for each pulse | ||||||||||||||
| End Condition | Voltage, Test Time | ||||||||||||||
| Cycle | Cycles | 65535 | |||||||||||||
| Steps | 254 | ||||||||||||||
| Nested Function | Max three levels of loops | ||||||||||||||
| Protective Function | Software | ● Power-off data protection | |||||||||||||
| ● Off-line Operating | |||||||||||||||
| ●User-defined safety (upper and lower) tolerance of current, voltage and delay time | |||||||||||||||
| Hardware | Reverse-connecting protection | ||||||||||||||
| Channel Features | Independent pairs of closed loop for constant current source and constant voltage source | ||||||||||||||
| Channels | Independent control | ||||||||||||||
| Detection and Sampling | 4-wire Connecting | ||||||||||||||
| Noise Density | <85dB | ||||||||||||||
| Data Management | MYSQL Database | ||||||||||||||
| Communication Means | TCP/IP Protocol | ||||||||||||||
| Exports Formats | EXCEL, TXT, Graph | ||||||||||||||
| Communication Interface | Ethernet Port | ||||||||||||||
| Number of Channels Per Cabinet | 8 | ||||||||||||||
| Operating Environment | |||||||||||||||
| Description | Product Specification | ||||||||||||||
| Operating Temperature | 0℃~40℃ | ||||||||||||||
| Storage Temperature | -10℃~50℃ | ||||||||||||||
| Operating Humidity | ≤70% RH | ||||||||||||||
| Storage Humidity | ≤80% RH | ||||||||||||||
| Description | Product Specification | ||||||||||||||
Our advantages:
All kinds of types are manufactured for a range of current from 1mA to 1000A, a range of voltage from 5V to 500V to meet customers' special needs. We also provide the BTS which can test the voltage of 0 V or even lower.
1.Reasonable Price, standarbale and Reliable Product.
2.Improve the quality and life expectancy of your products
3.Work Performance more effective and efficacy
4.17years innovation guarantees you a in better future.
Warranty and Customer Service:
Neware warrants its equipment for 1 year from shipment, to be free from defects in workmanship and material. For some other consumptive materials, like battery clamps, we provide a 3-month warranty. This warranty, including customer service support and software licenses, is not transferable. Meanwhile, we provide lifetime software update
service to help your equipment optimized in its best status.
We provide below customer services:
1.Free Technical Training.
2.Free Service Call Service.
3.Testing Service.
4.Calibration Service.
.gif)
