Plate beveling 9M Edge Milling Machine With 6-50mm Milling Thickness
1. Specifications:
a. Max length of workpiece:9m
b. Milling thickness: 6-50mm
c. Max depth of milling: 3mm
d. Milling angle: 045°
e. Model of milling head: 1TX32
f. Power of milling head motor: 5.5KW,turning speed:1420 r/min
g. Suitable diameter of milling cutter: D100250 mm
h. Turning speed of main shaft: 80400 r/min
i. Expansion length of main shaft: 63 mm
j. Milling forward speed: 0.2 m/min~0.6m/min
k. Forward motor power: 1.5 kw
l. Quick forward and return speed of milling: V=1.2 m/min
m. Power of hydraulic system: 5.5 kw
n. Pressure of hydraulic system: ≤3.5 Mpa
2. Description:
Edge milling machine is used milling technology instead of planing. It is one kind new and high efficiency technology. It widely used in industries as pressure vessel, boiler, shipbuilding, electric power, chemical industry and machinery manufactures and so on. Before the plate welding, can make straight edge, bevel edge and the U-type groove.
3. Range of supply
| Main machine | Inc. body, pressbeam, wall plate, milling part, material support frame, electrical control system. |
| Machine tool | Inc. one Φ200mm standard facing cutter, one cutter drag bar, one axle, one press screw, one pressure screw, one tool spanner, one M10 socket screw wrench. |
| Spare parts | Inc. one set milling change gear, one set hydraulic press oil cylinder seal loop, two 2A, and two 4A melt cores. |
| Hydraulic system: | There’s one set of hydraulic pump station inside of the machine, and press oil pump and circuit under press girder. |
| Electrical control system | There is electrical control box and operation panel at one side of the machine body, also one set of electrical control box and operation panel on the milling parts. |
