Name: LS-RDIO0202 wireless I/O module 2 digital inputs 2 relay output 2km wireless control
Introduction
LS-RDIO0202 Modbus RTU is a 1W I/O module, 2 isolated digital inputs, 2 isolated relay outputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for pump control, water level monitoring, motor, valve, light ON-OFF control.
· Transparent I/O System, no programming required
· Not need internet, no third party cell, no monthly fees
· You have full control over your own carrier
· Real time status feedback from the remote site
· Fast installation and easy setup
Parameter:
· Input: 2 isolated digital active inputs (passive input customize)
· Output: 2 isolated relay passive contact outputs (active output customize), contact max load 5A@220V AC, 5A@30V DC.
· Communication: RS485 (wireless RS485customize)
· Protocol: Modbus RTU
· Collocated with a wireless data module whose transmitting distance is about 2km-3km. The working frequency 433MHz (400-470MHz); RF power: 1W; Receiving sensitivity: -123dBm
· Receiving current:<50mA; transmitting current: 600mA
· Power supply: DC 9V-36V
· Dimension: 115mm*90mm*40mm
Application:
· Lighting Control Systems
· Wireless Pump Control
· Wireless Valve Actuation
· Conveyor Control
· Grain Augers
· Engine Control
· Tank Level Monitoring
· PLC Activation
· SCADA
Parameter of LS-RDIO0808 | |
Power output: | 1W or 100mW version |
Power supply: | 9V-30V (usually choose 24V DC or 12V DC) |
Control distance: | 3km or (1km version) |
Baud rate: | 1200bps |
Receiving sensibility: | -123dBm@1200bps, -118dbm(9600bps) |
Networking | |
Networking: | Point to point and point to multipoint |
Port Description | |
Input: | 8 active DI (passive customized) |
Output: | 8 relay passive outputs, contact max load AC250V/5A,DC30V/5A (Active output 0-5V customized) |
Communication port | RS485 (wireless RS485 customize) |
Current | |
Transmit current: | <600mA (or 100mA version) |
Receiving current: | <50mA (or 20mA version) |
General | |
Frequency: | 433MHz, 400, 450, 470 or other band |
Channel No: | 16 channels,can change via DIP switch |
Physical Properties | |
Dimension: | 145×90×40(mm) |
Antenna Connector: | SMA,vehicle antenna with 1.5m cable |
Temperature: | -35℃~+75℃( industrial) |
Mounting method: | Standard 3.5 inch industrial guild rail |
