GD-261 Pensky-Martens Closed-Cup Flash Point Tester
Introduction:
This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens Closed Cup Method and ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.
Features:
l This instrument is designed as per GB/T261 and ASTM D93.
l The heating power is continuously adjustable. The power is shown visually by voltmeter.The temperature control mode is advanced and reasonable.
l The structure is designed small and exquisite.The stainless-steel table board is beautiful and easy to clean.
l Operation is easy.Test results are precise.It has been chosen as the instrument to test the closed cup flash point by many metering and detecting institutes.
Specifications:
Power supply | AC (220±10%)V, 50Hz |
Heating device | The heating power is continuously adjustable from 0 W to 600W |
Heating rate | (1~12)℃/min; Controllable and adjustable |
Stirring rate | Pr℃edure A: (90~120)RPM, Pr℃edure B: (250±10)RPM |
Oil cup | (1) Inner diameter: 50.7mm~50.8mm. (2) Depth: 55.7mm~56.0mm (3) The scribed line depth of capacity of testing oil: 33.9mm~34.3mm. (4) Capacity of testing oil:about 70ml |
Igniting device | (1) Igniting source: gas(or other civilian fuels,the same below) (2) Electric ignition. Gas flame diameter:3.2mm~4.8mm |
Thermometers (Mercury-in-glass thermometer) | (1)Scale -5℃~110℃, division 0.5℃ (2)Scale 20℃~150℃, division 1℃ (3)Scale 90℃~370℃,division 2℃ |
Ambient temperature | ≤ 35℃ |
Relative humidity | ≤ 85% |
Maximum power consumption | 650W |
