GD-261-1 Pensky-Martens Closed-Cup Flash Point Tester
Introduction:
This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.
Features:
l Single chip micr℃omputer control technique.LCD screen displays.English man-machine interaction interface.The heating power is continuously step-less adjustable.The rate of heating up is exact.Easy setting for parameters.
l The LCD screen has prompting menu,prompting input operation interface.It shows the setted parameters, real-time temperatures and other test parameters.Press the "record"button when the flash point appears.The screen will show and reserve the flash point.
l The structure is newly design and small.Stainless steel table-board looks clean and beautiful.It can be used as long as equipped with gas or other civilian fuels.It is easy to use and test results exact.
Specifications:
Power supply | AC( 220±10% )V, 50Hz |
Heating device
| (1)The furnace is silicon carbide material. Power is 600W |
(2)The heating power is adjustable from 0 W to 600W | |
Heating rate | Pr℃edure A: (5~6)℃/min, Pr℃edure B:(1~1.6)℃/min |
Automatically controlled | |
Stirring device | (1)Stirring motor: BYGH101 stepping motor |
(2)Driving mode: flexible shaft | |
(3)Shaft size: 8mm*40mm | |
Stirring rate | Pr℃edure A: (90~120)RPM, Pr℃edure B: (250±10)RPM |
Igniting device | (1)Igniting source: gas (or other civilian fuels, the same below) |
(2)Electric ignition. Gas flame diameter:3.2mm~4.8mm | |
Temperature testing probe | RTD, PT100 |
Ambient temperature | ≤ 35℃ |
Relative humidity | ≤ 85％ |
Maximum power consumption | 650W |
