We are professional Inconel625 Inconel 625/UNS N06625/2.4856/Alloy 625/NCF 625 Seamless Welding Coiled Coil Tubes Pipes Tubings Pipings from china
We are professional Inconel 625, Inconel625, Alloy 625, alloy625, UNS N06625, 2.4856 Stainless Steel Coiled tubes, Stainless Steel Coiled tubings, Stainless Steel Coiled pipes, Coil tubes, Coil tubings, Coil pipes, tube coil, tubing coil, pipe coil factory from China
The outer diameter of Inconel 625, Inconel625, Alloy 625, alloy625, UNS N06625, 2.4856 Stainless Steel Coiled tubes, Stainless Steel Coiled tubings, Stainless Steel Coiled pipes that we could do is in 1/8", 1/4", 1/2", 3/8", 3/4", 5/8",
The wall thickness of Inconel 625, Inconel625, Alloy 625, alloy625, UNS N06625, 2.4856 Stainless Steel Coiled tubes, Stainless Steel Coiled tubings, Stainless Steel Coiled pipes that we could do is in 0.028", 0.035", 0.049", 0.065", 0.083"
Our Inconel 625, Inconel625, Alloy 625, alloy625, UNS N06625, 2.4856 Stainless Steel Coiled tubes, Stainless Steel Coiled tubings, Stainless Steel Coiled pipes are widely used in a numerous petrochemical applications, including:
Down hole tubes
Subsea umbilical's
Process constructions
General control system
Steam supply lines
Gas transport lines
Instrumentation
The pressure that we could meet is as follows: 50MPA— 130MPA
Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of organic and mineral acids. Good high temperature strength.
Chemical composition
Grade | % | Ni | Cr | Mo | Nb | Fe | Al | Ti | C | Mn | Si | Co | P | S |
625 | Min | Bal. | 20 | 8 | 3.15 | |||||||||
Max | 23 | 10 | 4.15 | 5 | 0.4 | 0.4 | 0.1 | 0.5 | 0.5 | 1 | 0.015 | 0.015 |
Mechanical properties:(Minimum value at 20°C)
Tensile Strength σb/MPa | Yield Strength σp0.2/MPa | Elongation σ5 /% |
760 | 345 | 30 |
Standards
Bar | Forging | Sheet/Strip | Wire | Pipe |
ASTM B446 | ASTM B564 | ASTM B443 | ASTM B446 | ASTM B444 ASTM B704 ASTM B705 |
Characteristics
Excellent mechanical properties at both extremely low and extremely high temperatures.
Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion.
Almost complete freedom from chloride induced stress corrosion cracking.
High resistance to oxidation at elevated temperatures up to 1050C.
Good resistance to acids, such as nitric, phosphoric, sulfuric and hydrochloric, as well as to alkalis makes possible the construction of thin structural parts of high heat transfer.
Applications
Components where exposure to sea water and high mechanical stresses are required.
Oil and gas production where hydrogen sulfide and elementary sulfur exist at temperature in excess of 150C.
Components exposed to flue gas or in flue gas desulfurization plants.
