We are professional Inconel625 Inconel 625/UNS N06625/2.4856/Alloy 625/NCF 625 Seamless Coiled coil Subsea umbilical Down hole Chemical Injection Hydraulic Control Lines
We are professional Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines factory from China
The outer diameter of Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines that we could do is in 1/8", 1/4", 1/2", 3/8", 3/4", 5/8"
The wall thickness of Inconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing that we could do is in 0.028", 0.035", 0.049", 0.065", 0.083"
Our IInconel 625, inconel625, alloy625, Alloy 625/UNS N06625 Stainless steel coiled control line tubes/pipes/tubing, Hydraulic Control lines, Chemical Injection Lines are widely used in a numerous petrochemical applications, including:
Down hole tubes
Subsea umbilical's
Process constructions
General control system
Steam supply lines
Gas transport lines
Instrumentation
The pressure that we could meet is as follows: 50MPA— 130MPA
Welcome the inquiry
Chemical composition
Grade | % | Ni | Cr | Mo | Nb | Fe | Al | Ti | C | Mn | Si | Co | P | S |
625 | Min | Bal. | 20 | 8 | 3.15 | |||||||||
Max | 23 | 10 | 4.15 | 5 | 0.4 | 0.4 | 0.1 | 0.5 | 0.5 | 1 | 0.015 | 0.015 |
Mechanical properties:(Minimum value at 20°C)
Tensile Strength σb/MPa | Yield Strength σp0.2/MPa | Elongation σ5 /% |
760 | 345 | 30 |
Standards
Bar | Forging | Sheet/Strip | Wire | Pipe |
ASTM B446 | ASTM B564 | ASTM B443 | ASTM B446 | ASTM B444 ASTM B704 ASTM B705 |
