0402 Package Pure Green Chip Side Emitting Led Dominant Wavelength 525nm
PCB 0402 Side View LED
Type: 0402/0603/0805/1206
Emitting angle: 60/120°
LED chips: Taiwan Epistar/Japan Nichia
Package: bulk/tapping reel
Colors: white, warm white, red, green, blue, amber, orange, bi-color, RGB 3 colors, IR, UV
OEM and ODM orders are accepted
Features:
- White SMT package.
- Side view white LED.
- Wide viewing angle.
- Lead frame package with individual 2 pins.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- The product itself will remain within RoHS compliant Version.
- Features:
- Package in 8mm tape on 7″ diameter reel.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- Mono-color type.
- The product itself will remain within RoHS compliant Version.
- Descriptions:
- The 0402 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications, etc.
- Applications:
- Automotive: Backlighting in dashboard and switch.
- Telecommunication: Indicator and backlighting in telephone and fax.
- Flat backlight for LCD, switch and symbol.
- Indoor signboard use.
General use.
Part No. | Chip Material | Lens Color | Source Color |
DL-PCB0402PGC | InGaN | Water Clear | Pure Green |
- Absolute Maximum Ratings at Ta=25
-
Parameters Symbol Max. Unit Power Dissipation PD 95 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 100 mA Continuous Forward Current IF 25 mA Reverse Voltage VR 5 V Electrostatic Discharge (HBM) ESD 400 V Operating Temperature Range Topr -40 to +80 Storage Temperature Range Tstg -40 to +85 Soldering Temperature Tsld 260 for 5 Seconds Electrical Optical Characteristics at Ta=25
Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity * IV 100 180 --- mcd IF=20mA (Note 1) Viewing Angle * 2θ1/2 --- 120 --- Deg IF=20mA (Note 2) Peak Emission Wavelength λp --- 520 --- nm IF=20mA Dominant Wavelength λd --- 525 --- nm IF=20mA (Note 3) Spectral Line Half-Width λ --- 35 --- nm IF=20mA Forward Voltage VF 2.80 3.40 3.80 V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
0402 SMD LED Package Dimension:
Typical Electrical / Optical Characteristics Curves
(25 Ambient Temperature Unless Otherwise Noted)