White Lacquer And Wooden Veneer Bathroom Vanity With Led Light With Sink Tap
Product introduction
Name: Wholesale Hotel Bathroom Vanity White Lacquer Mashup Walnut Veneer
1) Countertop: Solid Surface
2) Carcase Materials: E1 Standard of Plywood wrapped with Melamine
3) Basin: White Ceramics
4) Mirror Thickness: 5mm
5) Handware: Handle
Door Panel: (Water Transfer Printing and Screen Printing Available)
1) Door Panel Base Material: E1 Standard of plywood
2) Door Panel Finish: High Gloss Lacquer and Laminate
Bathroom Cabinet Size
Double Door Cabinet: 630*430*450mm
Right Open Cabinet: 250*450*450mm
Basin: (DT-0104-020)910*200*465mm
Mirror: 600*27*800mm
Side Mirror Cabinet: 300*130*800mm
Bathroom cabinet Packing Procedure:
1. After production and inspection of bathroom cabinet, panels will be firstly lined with foamed plastics.
2. On the left and right side, panels are still wrapped with foamed plastics to reinforce the packing.
3. Then, these panels are to be packed in foldable paperboard express carton.
4. After finishing that, the carton will be fastened with adhesive tapes.
5. Concerning the breakable bathroom cabinet hardware and accessories, they are going to be separately placed in the carton.
6. Inside the carton, these hardware and accessories will be lined with EPE foam.
7. Foamed plastics are placed at the top of carton to ensure that hardware are wrapped very well.
8. When regular strong seaworthy packing is done, cartons will be unloaded onto the warehouse waiting for shipment.
Handling and loading and unloading must comply with the following provisions:
(1) handling should be light light, it is strictly prohibited and roll and vertical pieces must be on the back edge first.
(2) stone plank single block area of more than 0.25 m2, upright handling. Lifting tool for products in handling, the force must padding edge.
(3) wooden case packing products, with the hoisting equipment when loading and unloading
Below is more pictures of bathroom vanity design :
