high frequency uninterrupted power supply single phase 6kva-10kva online ups
Product Advantages:
1: More cost-save price
2: More optimized structure layout, makes the UPS size smaller.
3: Frequency multiplication controlled PFC circuit to reduce the volume of magnetic components, and makes UPS more smart and efficient.
4: PFC and INV adopts hardware current limit design, effectively accelerate the response time of current limit and improve the reliability of UPS
5: Latest Tri-level inverter control tech, makes UPS whole efficiency ≥94%, and improve UPS load capacity to support Air Conditioner, Laser Printer etc sensitive loads.
6: Latest soft switch tech in the boost PFC, enable to reduce the PFC IGBT's Voltage spike and switch loss, and improve the UPS capability to resist lighting and Instantaneous over-voltage.
Main Features
1>Generator Supportable.
2>Equipped with maintenance bypass switch.
3>Sealed lead acid, maintenance free battery.
4>Active input power factor correction (PFC).
5>Active Load Management, cold start function.
6>Wide range of input voltage and frequency.
7>Protection against all types of power problems.
8>SNMP,RS485 and EMD environmen monitoring
9>DSP Technology, compact design, cost-save price
10>Sufficient Expansion Slots for USB,AS400,CMC monitoring,
11>Support sensitive loads like Air Conditioner, Laser Printer etc
12>0.8 Output Power Factor, Digital LCD Screen, Zero transfer time.
13>True online double conversion technology, Pure Sine Wave Output.
14>Latest Tri-level inverter control tech, whole UPS high efficiency ≥94%
| Queen Star Plus Series 6K - 10K Technical Specification | |||||
| Index | Q6K Plus | Q6KL Plus | Q10K Plus | Q10KL Plus | Comments |
| Input | |||||
| Input voltage | |||||
| Rated voltage | 220VAC | ||||
| Phase | Si1 with ground | ||||
| Turn on voltage range | (120±5~274±5)VAC | ||||
| Bypass voltage range | (60±5~300±5)VAC | Could be adjusted by software. | |||
| Bypass low loss | 60VAC~220VAC(default 60VAC) | ||||
| Bypass low comeback | Low loss +5VAC | ||||
| Bypass high loss | 220VAC~300VAC(default 300VAC) | ||||
| Bypass high comeback | High loss -5VAC | ||||
| Line low loss /comeback | (120±5) VAC /(140±5) VAC | load≤50% | |||
| (150±5) VAC /(165±5) VAC | 50% | ||||
| (160±5) VAC /(175±5) VAC | 80% | ||||
| Line high loss/comeback | (274±5)VAC/(260±5)VAC | ||||
| Input frequency | |||||
| Rated frequency | 50Hz | ||||
| Frequency low loss | (40~49) ±0.2Hz(default:46Hz) | Could be adjusted by software. | |||
| Frequency low comeback | Frequency low loss +0.5Hz | ||||
| Frequency high loss | (51~60)±0.2Hz(default:54Hz) | ||||
| Frequency high comeback | Frequency high loss -0.5Hz | ||||
| Input power factor | |||||
| It power factornpu | > 0.99 | Q6K Plus & Q6KL Plus: 220VAC, full R load Q10K Plus & Q10KL Plus: full R load | |||
| Generator | Support generator input | Generator rating ≥2*UPS rating | |||
| Input current | |||||
| Rated current | 25A | 27A | 41A | 43A | |
| Input THDI | 10% | ||||
| Output protection | |||||
| Rating protection | 32A Breaker | 50A Breaker | |||
| Output power | |||||
| VA/watt | 6000/4800 | 10000/8000 | |||
| Rated voltage | 220VAC | Sine wave | |||
| Voltage range | 200/208/220/230/240VAC | Q6K Plus & Q6KL Plus: Could be adjusted by software. 10% derating for 208VAC/200VAC. | |||
| Voltage regulation | ±1% | ||||
| Voltage distortion | ≤6% | Full RCD load | |||
| ≤2% | Full R load | ||||
| DC offset | ≤200mV | ||||
| Transient response | ≤9% | R load 0%~100%~0% | |||
| ≤6% | R load 20%~100%~20% | ||||
| Transient recovery | ≤60ms voltage recovery to 90% | Full RCD load | |||
| Bypass output before turn-on | YES | ||||
| Crest ration | 3:1 | ||||
| Output frequency range | |||||
| Normal mode | 1,Same as input frequency(46Hz~54Hz) 2,50Hz(Input frequency>54Hz or Input frequency<46Hz) | ||||
| Battery mode | (50+0.1) Hz | ||||
| Slew rate | 1 Hz/Sec | ||||
| Efficiency | |||||
| Normal mode | > 93% | ||||
| Battery mode | > 91% | ||||
| Overload | |||||
| Normal mode/ battery mode | Overload warning only | 105%±5%≤load | |||
| 1min,then transfer to bypass and alarm. | 105%±5% | ||||
| 30S,then transfer to bypass and alarm. | 125%±5% | ||||
| 100mS, then transfer to bypass and alarm. | load>135%±5% | ||||
| Automatically retransfer | YES | ||||
| Short protection | |||||
| Normal/ battery mode | YES | ||||
| Transfer time | |||||
| Normal to battery mode | 0mS | 0mS | |||
| Battery to normal mode | 0mS | 0mS | |||
| Normal to bypass mode | <4mS | 0mS | Q6K Plus & Q6KL Plus: 0mS (option)with load | ||
| Bypass to normal mode | <4mS | 0mS | |||
| Battery and charger | |||||
| Battery | |||||
| Rated voltage | 192VDC | ||||
| Type/Rating | Sunshine 7AH/12V | Sunshine 9AH/12V | |||
| Battery quantity | 16 PCS | 16 PCS | |||
| Backup time | > 14min | >8min | Half load | ||
| Protection | |||||
| Low alarm voltage/ comeback voltage | (180.8V±4V)/ (188.8V±4V) | ||||
| Shutdown voltage/ comeback voltage | (176V±4V)/ (184V±4V) | (176V±4V)/ (184V±4V) | (176V±4V)/ (184V±4V) | (176V±4V)/ (184V±4V) | Load < 1000W |
| (152V±4V)/ (160V±4V) | (160V±4V)/ (168V±4V) | (152V±4V)/ (160V±4V) | (160V±4V)/ (168V±4V) | Load>= 1000W | |
| DC protection | |||||
| Overcharge protection/ comeback voltage | (249.6V±4V) / (216V±4V) | ||||
| Leakage current | < 500uA | ||||
| Over discharge protection | 14.5h | Could be set by software | |||
| Battery test | |||||
| Battery weak | YES | ||||
| Battery fault | YES | ||||
| Charger | |||||
| Output voltage | (219.2±3)VDC | ||||
| Charge time | 7 hours to 90% capacity | ||||
| Charge current | 1A | 5.5A | 1A | 5.5A | |
| Interface | |||||
| Alarm silence | YES | ||||
| DC power turn-on | YES | ||||
| Automatically retransfer | YES | ||||
| Audio alarm | |||||
| Battery mode | Beep/4s | ||||
| Battery low/ charger fault | Beep/1s | ||||
| UPS fault | Continue beep | ||||
| Overload | Beep/1s | ||||
| Bypass mode | Beep/2Min | ||||
| L/N inverse | Beep/2Min | ||||
| Communication | |||||
| RS232 interface | YES | ||||
| Intelligent slot | YES | ||||
| Monitor software | Appending with UPS | ||||
| Cooling | |||||
| Force air cooling | |||||
| Display | |||||
| LCD/LED displays UPS status | |||||
| Environment | |||||
| Work temperature | 0ºC~40ºC | ||||
| Altitude | <1000m | ||||
| Audible noise | ≤55dB | ≤60dB | |||
| Storage temperature | -15ºC~45ºC | ||||
| Work humidity | 20%~95% | ||||
| Standard | |||||
| EMS | |||||
| ESD | IEC61000-4-2 | Level4 | |||
| RS | IEC61000-4-3 | Level3 | |||
| EFT | IEC61000-4-4 | Level4 | |||
| Surge | IEC61000-4-5 | Level4 | |||
| EMI | |||||
| Conducted | EN55022 | Class B | |||
| Radiated | EN55022 | Class B | |||
| Safety | |||||
| Safety | GB4943-2001/IEC62040-1 | ||||
| Transportation | |||||
| Drop test | GB-T4857-18 | ||||
| Vibration test | B-WR1-129(GB-T14715-93) | ||||
| Machinery features | |||||
| Size | |||||
| Outline dimension and net weight | |||||
| L*W*H(mm) | 533*260*560 | 425*190*328 | 533*260*560 | 533*260*501 | |
| Net weight (Kg) | 55kg | 12.2kg | 62kg | 21kg | |
| Optional functions | |||||
| 60Hz | Optional | Set by software | |||
| Converter mode | Optional | Set by software | |||
| ECO | Optional | Available and set by software | |||
| EPO | Optional | ||||
| LCD display | Optional | ||||
