Description
GS-MI/AF medium-intensity type A aviation obstruction light, its base is caste by high intensity aviation aluminum with full sealed structure;Light source adopts high efficient LED chip, which has the specific of high light intensity and long service life.Lamp shade adopts boronsilicate glass, which has strong ability of corrosion, anti-UV, anti-shock; Controlling circuit has strong ability of lighting protection and with anti-surge protection device, it can adapt to extremely bad working environment.The lighting comes with a variety of functions, the user can be adjusted according to demand.
Specification
Name | Parameter |
FAA Standard | L-865/866 |
Type | GS-MI/AF |
Average power consumption | ≤20W |
Power Supply Frequency | 50HZ～60HZ |
Power voltage | AC180V～ AC264V |
Quantity of LED | 80pcs×5W |
Flash rate | Flashing 40 times/min |
Continuous working time | 200ms at night, 70ms at daytime |
Light intensity | 2000cd (±25%)～20000cd (±25%) |
Horizontal Out-put | 360° |
Vertical Divergence | >10° |
Service Life of the Light Source | ≥20years |
Emitting Color | White |
Overall Size(mm) | 237mm×237mm×222mm |
Installation Size(mm) | ￠180mm×M8 |
IP Protection | IP65 |
Optically Controlled Ambient Brightness | 50/100Lux |
Ambient Temperature | -40℃～60℃ |
Weight | 11kg |
Anti-Wind Ability | 80m/s |
Function&Features
1,The shell adopts high intensity aviation aluminum to cast, with full-seal structure.
2,With CREE chip, which has the specific of high light intensity, low power consumption, long service life.
3,Lamp shade adopts tempered glass material, which has strong ability of corrosion, anti-UV, anti-shock;
4,With anti-surge protection device,it can adapt to extremely bad working environment.
5,It can change light intensity automatically according surrounding light intensity.
6,With the impact resistance, anti lightning, resistant to sunlight, anti snow, can resist typhoons, hail and other severe weather
7,With over-current protection function.
Usage notice
1,Don't use any out of nominal voltage,otherwise will destroy the equipment.
2,Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
3,After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
4,Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.
Application
Block
Airport
High Mast lamp
Chimney
Bridge
Iron tower
Telecom towers
High-rise building
