Description
GS-MI/A(GPS) Medium Intensity Type A Aviation Obstruction Light, adopts army grade chip that can realize GPS synchronous control, with wireless synchronization function; Integration of the light source design can guarantee fixture last a long service life under a extremely environment; its base is caste by high intensity aviation aluminum with full sealed structure; Adopts imported LED chip, which has the specific of high light intensity, low power consumption, long service life; lamp shade adopts tempered glass material, which has strong ability of corrosion, anti-UV, anti-shock; Controlling circuit has strong ability of lighting protection and with anti-surge protection device,it can adapt to extremely bad working environment. With photoswitch, it can change light intensity automatically according to surrounding light intensity.
Specification
Name | Parameter |
FAA Standard | L-865/866 |
Type | GS-MI/A(GPS) |
Light intensity: | ≥2000cd(At night)≥20,000cd(During the day) |
Power Supply Frequency | 50HZ～60HZ |
Average Power Consumption/ | ≤20W |
Quantity of LED | 40pcs×5W |
Flash rate | Flashing 40times/min |
Flash duration | 70ms |
power source | AC180V～AC265V |
Horizontal Out-put | 360° |
Vertical Divergence | ≥10° |
Service Life of the Light Source | ≥20years |
Emitting Color | White |
Overall Size(mm) | 237mm×237mm×180mm |
Installation Size(mm) | ￠180mm×M10 |
IP Protection | IP65 |
Optically Controlled Ambient Brightness | 50/100Lux |
Ambient Temperature | -40℃～70℃ |
Weight | ≤8.5kg |
Anti-Wind Ability | 80m/s |
Function&Features
1,The shell adopts high intensity aviation aluminum to cast, with full-seal structure.
2,With CREE chip, which has the specific of high light intensity, low power consumption, long service life.
3,Lamp shade adopts tempered glass material, which has strong ability of corrosion, anti-UV, anti-shock;
4,With anti-surge protection device,it can adapt to extremely bad working environment.
5,GPS synchronous, it can realize wireless synchronization function.
6,It can change light intensity automatically according surrounding light intensity.
7,With over-current protection function.
Usage notice
1,Please don't install this light on places where can't received GPS signal.
2,In order to avoid attenuation GPS signal and can not realize synchronization function,don't let any metal cover the top of lighting.
3,Don't use any out of nominal voltage,otherwise will destroy the equipment.
4,After install and adjust product function must be installed the waterproof ring screw down the screws, in order to avoid the water.
5,Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
6,After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
7,Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.
Application
Block
Airport
High Mast lamp
Chimney
Bridge
Iron tower
Telecom towers
High-rise building
