PRODUCT DISCRIPTION
Products Introduce:
HRK series cutting machine is the upgrade of traditional ones. Adopted frame structure, this series make the overall stress relief tempered, bolts connecting with high strength , and the overall rigidity is good, and will gain less deformation. The beams of this series is solid without moving, the work piece material can be sent by the evacuation mechanism,and as for work tables, they were make of carbon tool steel, hardness of which can be 55-60HRC (ordinary table<30HRC)after high-frequency surface hardening, which makes the work table much harder than the hardness of stainless steel, and completely solve the phenomenon of the work surface grooves appeared due to low hardness of traditional machines, to ensure the work surface flatness ≤ ± 0.03mm, completely solve the reduction of the accuracy of the V-grooves due to deformation of work table surface, prolonged the life of the equipment. Around the work table there are care feeding device to prevent scratches during processing of sheet metal.
Products Feature:
1.The fuselage is welded with pure steel , and internal stress has been weakened after heating process, it has high strength and no deformation on the body of machine.
2. Applying the numerical control systems provided by Taiwan Yitu , so the technology is mature, and the performance of products is more stable and reliable.
3.The electronics are original products provided by the one of the three well-known global manufacturer-- Schneider, which can ensure life and stability of the circuit.
4.Using pneumatic control system of Taiwan Yadeke, clamping and release of the platen and jaws are fully automated, and the board will not get pined, the pressure is stable and reliable during the process.
5.Mitsubishi servo motor cutting feed, with high accuracy and is reliable, and the accuracy even be 0.01mm.
6.Mitsubishi servo motor control turret and feeding device, has accurate chipping and precise positioning.
7.As for Turret, it changed the traditional way to the way of forging nut screw drive steel rack and pinion, work together withprecise planetary gear of Li Ming Taiwan and servo motor power of Mitsubishi, which makes it easier to maintain, lower the failure rate, and makes it return faster, more efficient, and run more smoothly in a muted way.
8.work tables are made of carbon tool steel,the hardness of high-frequency surface can reach 55-60HRC (ordinary table<30HRC) after hardening
9.work table surface is equipped with a mechanical compensation, after long-time use it can adjust error of depth of V groove
10.Allowing using three knives to process "V" groove, thus the cutting amount can be allocated evenly,and the deformation of the workpiece can be reduced.
PRODUCT DETAILS
Leading DURMAPRESS CNC Stainless steel Sheet Metal Surface for V Cutting machine, V Grooving machine, 3200mm to 6000mm
This equipment is fully CNC V Groover Machine for metal sheet. It adopts advanced CNC system and innovative design with the advantages of high processing precision,
simple operation, no noise, no vibration and so on. It is widely used in the sheet metal V-groove, U-groove and other irregular groove processing (including stainless steel, aluminum, aluminum plate, copper, iron, plastic, wood, acrylic panels and other special plates).Particularly.
it is applicable to the V-groove processing of sheet metal before bending .
Main Device
| High precision ball screw | Taiwan TBI |
| Precision linear guide rail | Taiwan HIWIN |
| Angular contact ball bearings | NSK of Japan |
| Planing white steel blade | SECO of Sweden |
| Servo motor | Yaskawa of Japan |
| PLC | Yaskawa of Japan |
| Electrical components | Schneider of France |
| Power cable | IGUS of Germany |
| Pneumatic components | Taiwan AIRTAC |
Main parameters
| Name | 4Ax6000mm |
| Processing Width | 850-1500mm |
| Processing Length | 6000mm |
| Processing Thickness | 0.5-6mm |
| The back and front moving distance of beam | 850-1500mm |
| Moving speed of beam | 50-5000mm/min |
| The maximum left and right moving distance of carriage | 4300mm |
| The maximun moving speed of carriage | 50mm/min |
| Deviation of length | ±0.05mm |
| Location percision | ±0.05mm |
| The maximum travel of knife rest | 100mm |
OUR TEAM
DURMA SUCCESSFUL CASE
DURMA OFFICE
Packing & Delivery
RFQ
Payment Terms:
T/T, L/C at sight are acceptable by us.
Guarantee period:
Our product quality guarantee period is 13 months from B/L date. During guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by customers' incorrect operations, we will provide customers spare parts at cost price. We also can offer flexible extended warranties according to the actual situation.
After-sales services:
Our engineer can go to your factory for installation and showing operation details on condition of you provide the round-trip air tickets, visa formalities, food and accommodation. In turn, your engineers can come to our factory for learning the installation, operation and maintenance for free.
Why Choose Us:
1. We will run the machine for a few days, and use your materials to do the test. Only guarantee the machine shows best performance, and then we will ship out.
2. Our elite teams can provide you professional, customized, and all-round services around the clock. If you need any help, contact us by WHATSAPP, Skype, Email or Telephone.
How can we provide you efficient services (metal processing solution):
There are Three Steps as following:
1. Gather your requirements based on your real working situation.
2. Analyze your information and provide our feedback.
3. Offer options based on your specific needs. For instance, reg. standard products, we can offer professional recommendations; reg. non-standard products, we can offer professional designing.
