Summary:
Single unit output:powers 45W
Input voltage AC85-264V
100% full load burn-in test
Universal AC input: 90-264VAC
Fixed switching frequency at 47-63Hz
Protections: Short circuit/Overload/Over voltage
Installed on DIN rail TS35/7.5 or15
Approvals: CE
Size: 78*93*67mm
Input voltage AC85-264V
100% full load burn-in test
Universal AC input: 90-264VAC
Fixed switching frequency at 47-63Hz
Protections: Short circuit/Overload/Over voltage
Installed on DIN rail TS35/7.5 or15
Approvals: CE
Size: 78*93*67mm
Model Specification | DR-45W-5 | DR-45W-12 | DR-45W-15 | DR-45W-24 |
DC output | 5V 5A | 12V 3.5A | 15V 2.8A | 24V 2A |
Wave and noise | 75MVP-P | 70MVP-P | 60MVP-P | 60MVP-P |
Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stability | ±1% | ±0.5% | ±0.5% | ±0.5% |
Efficiency | 72% | 77% | 77% | 80% |
Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% |
AC input voltage range | 85~264VAC 47~63Hz 120-370VDC | |||
AC input voltage range | Cold-start current 30A/230V | |||
OverLoad protection | 105%~135%hicup mode:auto-recovery | |||
OverLoad protection | 115%~135% rated output voltage | |||
Setup,rise,hold up time | 300ms, 50ms, 80ms | |||
Withstand voltage | I/P-O/P, I/P-FG:1.5Kv O/P-FG:05Kv 1minute | |||
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:500VDC/100MΩ | |||
Working temperature | -10℃~+50℃ | |||
Safety standards | Design refer to GB4943,UL60950,EN60950 | |||
EMC standards | Design refer to GB9254,EN55022 classB | |||
Weight | 0.31kg |