Cylindrical roller bearing

We can produce the diameter from 15mm~ 800mm LHB cylindrical roller bearings.Following is the internal structure of LHB different product descriptions.
EC    Optimized internal design incorporating more and/or larger rollers and with modified roller/end flange contact
EW      Enhanced design, press steel cage.
EM      Enhanced design, machined brass cage.
J    Pressed steel cage, roller centred, unhardened
K       Tapered bore, taper 1:12
M       Two-piece machined brass cage, roller centred
MA      Two-piece machined brass cage, outer ring centred
MB  Two-piece machined brass cage, inner ring guided
MBS  As MB but with lubrication grooves in the guiding surfaces
ML  One-piece form-turned window-type brass cage, inner or outer ring centred
MP  One-piece window-type brass cage with milled, reamed or broached pockets, inner or outer ring centred
MPS  As MP but with lubrication grooves in the guiding surfaces
MR  One-piece form-turned window-type brass cage, roller centred
N  Snap ring groove in the outer ring
NR  Snap ring groove in the outer ring, with appropriate snap ring
N1  One locating slot (notch) in one outer ring side face
N2  Two locating slots 180° apart in one outer ring side face
P  Injection moulded cage of glass fibre reinforced polyamide 6,6, roller  centred
PH  Injection moulded cage of glass fibre reinforced polyetheretherketone   (PEEK), roller centred
PHA  Injection moulded cage of glass fibre reinforced polyetheretherketone (PEEK), outer ring centred
S1  Bearing rings dimensionally stabilized for operating temperatures up to +200 °C
S2  Bearing rings dimensionally stabilized for operating temperatures up to +250 °C
TN9  Injection moulded cage of glass fibre reinforced polyamide 6,6
VC025  Bearing with specially wear-resistant raceways for applications in heavily contaminated environments
VQ015  Inner ring with crowned raceway for increased permissible misalignment