Automatic Pick n Place machine TP210
Automatic pick and place machine TP 210 is the high cost-effective equipment in the market, it can pick and place variety of components by its vacuum nozzle. The machine can mount SMD chip components (above 0603), and SOIC, SOP (below 20mm); Beside round datum mark, square PCB pad and ring hole pad can be recognized as datum mark.
Features:
1. Automatic Mount by control of software.
2. Quick Protel data input or write-in by hand
3. Laser machinery position.
4. Visional program system can produce X, Y coordinates of all components automatically after confirmed the basic mark point.
5. Exact quadrate guide rail, smooth gliding arm for improving mounting accuracy.
6. Air suspended pick-and –place head.
7. High cost-performance automatic pick and place machine is the best choice for middle and small production\research and personal use.
Technology parameters Function
Type | TP210 |
Max PCB size | 300x200mm |
max moving range | 400×420mm |
max moving range of Z axes | 50mm |
Typical pick&place speed | 1500-2000cph |
max pick&place accuracy | ±0.014mm |
repeat accuracy | ±0.07mm |
Positioning | Machinery Position |
Component Available | SMD components (above 0603) and SOIC, SOP(below 20mm) |
Program way | Software program input |
Driving mode | use industrial Synchronous belt to drive |
Feeder | 8mm,12mm,16mm,24mm feeder |
Feeder Num | Can set 40 pcs of 8mm feeder (20 on left and front side each) standard configuration |
IC Plate Num | More than 2 |
Operating system | WINDOWS XP |
compressed air | 80psi(0.5Mpa) |
Power supply | 220V,50Hz |
Weight | 95kg |
Dimension | 980×1000×590mm |
