Polar Bear tile adhesive is one kind of pre-mixed powder that based on calcium sulphoaluminate , mixed with Portland cement, other inorganic silicate materials and additive agent in a appropriate proportion.
Technical data:
Item | Specification | |||
D | N | W-1 | W-2 | |
Bond Strength (MPa) | 0.5 | 0.5 | 1.0 | 1.0 |
Bond Strength in water(MPa) | 0.5 | 0.5 | 1.0 | 1.0 |
Bond Strength after heating and aging(MPa) | 0.5 | 0.5 | 1.0 | 1.0 |
Bond Strength after freezing or thawing(MPa) | 0.5 | 0.5 | 0.5 | 0.5 |
Early bond Strength (24h/MPa) | 0.5 | 0.5 | 0.5 | 0.5 |
Bond Strength open time 20 minutes(MPa) | 0.5 | 0.5 | 0.5 | 0.5 |
Slip (mm) | 0.3 | 0.3 | 0.3 | 0.3 |
Performance
1. High early strength and bond strength. Walking and crack-sealing after 2 hours in normal temperature.
2.Reduce working procedures. Using this product achieves efficiency result without immersing.
3. Water resistance strength and freezing-thaw resistance strength are better than Portland cement.
4.It has excellent water retaining property. The adhesive layer is thin and homogeneous.
5.It has good hydration under low temperature, and could be used under negative temperature according to our direction.
6.Avoid cracking, falling off and breaking.
7.Without toxic, smell, pollution and radioactivity.
Applications
1. CSA Tile Adhesive make it ideal for bonding ceramic tile, fictile, slab-stone, floor tile etc.
2. Can be used in cold area and icehouse etc.
3. Can be used to bond concrete wall and stone, and expanded polystyrene.
4. Can be used in projects which request quick hardening and time constraint situations.
Selection
Recommendation | CSA Tile Adhesive | |||
D Type | N Type | W-1 Type | W-2 Type | |
Floor tile (indoor and outdoor) | * | * | * | * |
Façade Ceramic tile (indoor) | * | * | * | |
Façade Ceramic tile (outdoor) | * | * | ||
Surface treatment
1.The surface must be clean, firm, dry, free of dust, dirt oil and grease and be strong enough to support the weight of fixed adhesives and tiles.
2.New casted concrete surfaces need to be cured for a minimum of 4 weeks prior to the application of tilling.
3.Water the basing surface and tiles can achieve rigid adherence.
Mixing
1.By the proportion 1:0.18 to mix dry powder with clean water, using blender to mix 5 minutes. Attention clean water first then dry powder.
2.Need to mix enough. Leave mixture 1 minute and then light to mix round a little prior to use.
3.Using up the mixed material within 2 hours.
