FX2N-232-BD MITSUBISHI communication board RS232 fx2n PLC
EXTERNAL DIMENSIONS:
mm (inches) Accessory : M3 self-tapping screws ´ 2, mounting bracket ´ 2
General specification
mm (inches) Accessory : M3 self-tapping screws ´ 2, mounting bracket ´ 2
1-- Mounting holes <2-f 4.0 (0.16")>
2-- Connector for programmable controller
3-- RXD LED : Flashes at high speed during sending.
4-- TXD LED : Flashes at high speed during sending.
5-- Connector (9-pin D-SUB type) for peripheral unit
The top face of this connector is higher than the top face of the panel cover of the programmable controller by approximately 3 mm (0.12") or by approximately 50 mm when the cable is connected.
6-- Mounting holes of connector <2 - M2.7 (0.11") ´ 0.635 (0.025")>General specification
General specifications is same as those for the FX2N series programmable controller.
Power supply specification
5 V DC,60 mA is required from the programmable controller.
The quality is guaranteed.It's tested before shippment.Not made by Mitsubishi,OEM product as the replacement.
The quality is guaranteed.It's tested before shippment.Not made by Mitsubishi,OEM product as the replacement.