MITSUBISHI RS485 Board for FX1N PLC
Description:
The RS-485 communication board FX1N-485-BD (hereafter referred to as "485BD") is connected to the FX1S/FX1N Series PLC basic unit,and available for the applications described below.#0.8773174295771209#
Data transfer function using the non-procedure method.
1)The 485BD transfers the data using the RS instruction between a bar code reader,personal computer or printer.As the 485BD is not equipped with buffer memory,it sends and receives the data using data registers specified by the RS instruction.For the RS instruction and the communication setting,refer to the FX Series Communication User's Manual.
2) Data transfer function using a dedicated protocol.
The 485BD transfers the data when a personal computer directly specifies devices of the PLC.
For the dedicated protocol and the communication setting,refer to the FX Series Communication User's Manual.
The RS-485 communication board FX1N-485-BD (hereafter referred to as "485BD") is connected to the FX1S/FX1N Series PLC basic unit,and available for the applications described below.#0.8773174295771209#
Data transfer function using the non-procedure method.
1)The 485BD transfers the data using the RS instruction between a bar code reader,personal computer or printer.As the 485BD is not equipped with buffer memory,it sends and receives the data using data registers specified by the RS instruction.For the RS instruction and the communication setting,refer to the FX Series Communication User's Manual.
2) Data transfer function using a dedicated protocol.
The 485BD transfers the data when a personal computer directly specifies devices of the PLC.
For the dedicated protocol and the communication setting,refer to the FX Series Communication User's Manual.
3) Parallel link function.
The 485BD transfers automatically 50 auxiliary relays and 10 data registers when two FX1S Series PLC's (two FX1N Series PLC's) are connected on a one-to-one basis.For the setting procedure and program examples,refer to the FX Series Communication User's Manual.
4) Easy PC link function.
The 485BD transfers automatically up to 64 auxiliary relays and 8 data registers when up to eight FX1S/FX1N/FX0N/FX2N/FX2NC Series PLC units are connected.For the setting procedure and program examples,refer to the FX Series Communication User's Manual.For the FX2N Series PLC,the version should be 2.00 or greater (manufacturer's serial No.780000 or later).
dimensions
Unit:mm
Accessories:Top cover for board 1
Terminal resistor 330 2
Terminal resistor 110 1
M3 screw to mount board 2
M3 screw to fix top cover 1
Station No. label for link
1-- Mounting hole (2-f3.5)
2-- Connector for PLC
3-- Terminal block for RS-485 equipment
The top face of this terminal box is higher than the top face of the PLC panel cover by approximately 7 mm.
4-- SD LED: Flickers at high speed during send.
5-- RD LED: Flickers at high speed during receive.
6-- Connector for display module FX1N-5DM or memory cassette FX1N-EEPROM-8L
The user manual,pls check http://www.chinaplccable.com/service/fx1n-485-bd-mitsubishi-rs485-board-for-fx1n-plc-user-manual-55.html
The user manual,pls check http://www.chinaplccable.com/service/fx1n-485-bd-mitsubishi-rs485-board-for-fx1n-plc-user-manual-55.html
