Introduction
DR-QG300 laser cutting machine is used for cutting and punching of sheet metal, steel, copper, aluminum, etc.. DR-QG300 use the dual-lamp laser ceramic cavity imported from British , it has higher output power, using the German ball screw, with the characters of high cutting speed, high precision and good stability.The surface cutted is smooth . In addition, the straight line / curve cutting path can be set freely.It is suitable for the cutting of stainless steel, carbon steel, aluminum, copper and other metal sheet material, the laser machine is the pulse xenon lamp-pumped laser infrared (1064nm) laser machine.
● friendly interface
● stable beam quality
● Automatic cooling system
● All operation is controlled by software, and it is easy to learn
Specifications
Laser wavelength 1064 nm
Pump light pulse xenon lamp (Lamps)
Cavity ceramic cavity
Collimated light red laser
Discharge current 100-400 A
Discharge pulse width 0.1-10 ms
Maximum cutting depth depends on the material, such as carbon steel 2.50mm, stainless steel 1.88mm
Cutting width 0.25-1 mm, depending on materials and auxiliary gas
Cutting area, according to the different needs of custom
Input voltage three-phase four-wire, AC 380V ± 10%, 50 Hz/60 Hz, with a protected ground (such as voltage fluctuation is too large to be equipped with voltage regulator)
Maximum input power 15 kW
Master device size 1300 mm x 1150 mm x 550 mm
Cooling unit 1500 mm x 1200 mm x 570 mm
Weight is about 580 kg
Cooling Water
For the use of sheet metal cutting and drilling, such as steel, copper, aluminum, etc.
