Introduction of Plastic production line:
This production line is used to made PPR PE water pipe. The featrued of such pipe machine:
* Special single screw extruder for polyolefin, having high extruding velocity and effective plasticization
* Separation mixing screw specialized for polyolefin
* Specially designed three co-extruding die, reasonable channel, smooth outside and inside wall, and little internal stress
* Producing pipe φ 20-φ 630mm, manufacture velocity up to 16m/min
* May be used to produce HDPE silicon core, or ordinary PP-R, PE, and PEX pipes.
* Low cost: The cost of nanometer & anti-virus pipes is merely increase 5-10% on the ordinary pipe basis.
This production line is used to made PPR PE water pipe. The featrued of such pipe machine:
* Special single screw extruder for polyolefin, having high extruding velocity and effective plasticization
* Separation mixing screw specialized for polyolefin
* Specially designed three co-extruding die, reasonable channel, smooth outside and inside wall, and little internal stress
* Producing pipe φ 20-φ 630mm, manufacture velocity up to 16m/min
* May be used to produce HDPE silicon core, or ordinary PP-R, PE, and PEX pipes.
* Low cost: The cost of nanometer & anti-virus pipes is merely increase 5-10% on the ordinary pipe basis.
| Mode | PE75 | PE125 | PE250 | PE630 |
| (MM) Max Diam. | Φ75 | Φ125 | Φ250 | Φ630 |
| Extruder | SJ65/28--SJ65/30B | SJ90/28--SJ90/30B | SJ90/32---SJ90/32B | SJ120/30B |
| Power(KW) | 40/90 | 60/132 | 90/132 | 280 |
| Motor type | Direct current model | Direct current model | Direct current model | Direct current model |
| Output(KG/H) | 85/210 | 130/300 | 300/450 | 900-1000 |
| Speed(M/MIN) | 1.5-10 | 0.6-6 | 0.4-4 | 0.1-1 |
| Max.traction(N) | 9800 | 15000 | 19500 | 39000 |
| Cutting type | Disc type cutting | type cutting | Planet model with cut angle funcation | Planet model with cut angle funcation |
| Measurement(MM) | 28000×35000×3000 | 30000×35000×3000 | 38000×35000×3500 | 45000×35000×4000 |
