Sensors

1. Accuracy @ IPN, TA=+25 C: +/-1%
2. Non-linearity (0~ IPN): +/-1%
3. Electrical offset voltage VOE, TA=+25 C : ≤+/-40mV
4. Therma

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

1. Operating temperature: -10 C ~+85 C
2. Storage temperature: -15 C ~+85 C
3. Weight: approx. 60g
4. Standards: EN50178

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

UPS current sensor closed loop
1. Zero magnetic flux Hall effect principle
2. Single-circuit power supply

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

1. Operating temperature: -10 C ~+80 C
2. Storage temperature: -40 C ~+80 C
3. Weight: approx. 60g
4. Standards: EN50178

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

1. Primary normal current IPN: 500A r.m.s
2. Primary current, measuring range IP: 0~±800A
3. Secondary normal cur

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

1. Accuracy @ IPN, TA=+25 oC, ≤±0.4%
2. Non-linearity: better than 0.1%, TA=+25 oC
3. Offset current @ IP=0, TA=+25 oC: not more than ±0.4mA

BD series current transducer isolate and convert electrical parameters (e.g.current,voltage,frequency,power and power factor) in the power grid into D

For the electronic measurement of currents: DC, AC, pulsed, mixed, with a galvanic isolation between
the primary circuit (high power) and the sec

1. Hall effect measuring principle
2. Galvanic isolation between primary and secondary circuit
3. Insulated plastic case made of white PPO reco

UPS hall sensor
High accuracy Good linearity
Low thermal drift
Good current overload capability
Conform to UL94-V0 standard

1. Primary normal current IPN: 50A r.m.s
2. Primary current, measuring range IP: 0~+/-70A
3. Measuring resistance: RMmin

For the electronic measurement of currents: AC, DC IMPL.,etc.,with
primary (high power) and the secondary (electronic) circuits.

1.Secondary normal current: 200mA rms
2. Conversion ratio: 1:2000
3. Supply voltage(1±10%): ±12V~±18V
4. Current consum

1. Primary normal current IPN: 3000A r.m.s
2. Primary current, measuring range IP: 0~+/-5000A
3. Measuring resistance: RMmin