Valves

Power consumption AC: 4.5VA DC : 3W
Scope of voltage: AC: ±15% DC: ±10%
Long life cycle
ISO/CE Certification
Products can be returned or exchange

solenoid valve base is mainly used to connect the solenoid valves. Using it, it can control a certain pneumatic devices at same time.

Two position, two way, normal close switch, magnetic solenoid valve.
Stainless Solenoid Valves
Electric Timer Valves

Power consumption AC: 3.5VA DC : 3.0W
Protection IP65 ( DIN40050 )
Connector DIN43650B

equipments to meet quality of ISO9001 procedures to meet world standard and internationalized specification.

(1)small use of space
(2)easy installation
(3)sensitivity reverse of direction
(4)steady per

solenoid valve is the interface between electronic controllers and pneumatic systems.

(1)small use of space
(2)easy installation
(3)sensitivity reverse of direction
(4)steady per
TXPC Solenoid Valves

Port Size: 1/8"
4/2 way,single solenoid valve
Housing: Aluminum anodized Pilot flange: plastic (POM)
Wroking Pressure :1-10bar

solenoid valve is the interface between electronic controllers and pneumatic systems.

(1)small use of space
(2)easy installation
(3)sensitivity reverse of direction
(4)steady per
TXPC Solenoid Valves

The SY Can Be Used Individually or Manifold Mounted
Long Life (Exceeding 50 Million Cycles)
Response Time 10 mSec or Less
Clean Aesthetic Design

quality of ISO9001 procedures to meet world standard and internationalized specification.

SMC V2A
Working medium : air,water,steam
Motion Pattern : Direct Drive
Type : Normal Close Type

Power consumption AC: 3.5VA DC : 3.0W
Protection IP65 ( DIN40050 )
Connector DIN43650C

solenoid valve is the interface between electronic controllers and pneumatic systems.

Direct Drive Valve
Alloy Body Valve
F Class Insulation

usually an actuator, allowing a relatively small signal to control a large device.

Orifice: 12mm
Operating pressure: 1.5-10 Bar
Fluid/Ambient temperature:-10 ... +60°C

Direct Drive Valve
Alloy Body Valve
F Class Insulation
3 Way Valves