Valves

1.Forged Brass Components
2.Lowest Pressure Drop
3.Dual Gage Ports Included
4.Type K Copper Tube Ends
5.For oxygen/chemical gas...

1.Forged Brass Components
2.Lowest Pressure Drop
3.Dual Gage Ports Included
4.Type K Copper Tube Ends
5.For oxygen/chemical gas...

1.Brass check valve
2.Brass body/ball
3.Sizes 1/2" to 4"
4.with type "K" tube
5.For oxygen/chemical gas...

These are used to control the flow of air from the compressor into a receiver. When the compressor reaches unload pressure, the check valve closes and

Brass Horizontal Check Valve/ Brass Swing Check Valve
brass body, brass bonnet, Brass swing, brass nut .Brass can be CuZn39Pb3 CZ122, C37710, lead f

The shuttle valve integrates 2 one-way valves. Usually, it is used high and low pressure output and automatic&manual equipments.

1brass spring check valve
2.perfect seal,no peeling,no burr
3.both INCHS and AMETEK
4.Surface polished,smooth and clean. no leakaged

Check valve is used to prevent the meida flowing back in the pipeline.
Bottoml Valve,size:1/2"to 4"

Nomical Pressure:1.6MPa
Working Medium:Water,Non-corrosive liquid
Working Temperature:-20℃≤t≤100℃
Pipe thread to ISO228(DN15-DN50)/ISO7

This valve is ideal for all types of plants:
hydraulic, pneumatic and heating plants.
It is suitable to install in horizontal, vertical or oblique

The quick exhaust valve we manufacture increases cylinder rod speed by dumping exhaust air directly at the cylinder .

Nomical Pressure:1.6MPa
Working Medium:Water,Non-Corrosive liquid(not include oil),Saturated stream
Working Temperature:-20℃≤t≤150℃

Brass Spring Check Valve With Filter/ brass body SS 304&316 filter , plastic pin Material: MS58, CW617N, CuZn40Pb2, CZ132 , HOT STAMPING/ FORGING

Check valve is used to prevent the meida flowing back in the pipeline.
Bottoml Valve,size:1/2"to 4"

Brass Spring Check Valve Material: MS58, CW617N, CuZn40Pb2, CZ132 , HOT STAMPING/ FORGING
Disc: Brass Disc silicon rubber seals or ABS disc NBR sea

One-way baffler(Speed control valve):
It is a flow control valve made up of one-way valve and baffler.

Check valve is used to prevent the meida flowing back in the pipeline.
Bottoml Valve,size:1/2"to 4"

The quick exhaust valve we manufacture increases cylinder rod speed by dumping exhaust air directly at the cylinder .

Check valve is used to prevent the meida flowing back in the pipeline.
Bottoml Valve,size:1/2"to 4"

material: brass
size: 1/2''-4''
OEM and ODM business welcome
high quality products with competitive prices