Bronze, Tin & Nickel Alloys

Nickel 220 alloy wire is very similar to Nickel 205 wire, except with a chemical composition controlled specifically for application as cathodes.

Ni32Fe Sheet (Plate Strip) is Nickel-Iron alloy - Used for applications where magnetic shunts are used for temperature compensation in energy meters.

Invar 36 sheet: nickel-iron alloy 36: possessing a rate of thermal expansion one-tenth that of carbon steel at temperatures up to at 400ºF(204ºC).

Nilo 48 Sheet Plate Strip has expansion that matches soda-lead and soda-lime glass. Used as leads for electronic applications.Thickness:0.05mm above

NiFe 60/40 wire mesh/screen is high nickel based welding wire for joining and rebuilding cast iron. Mesh: 0.5-250 mesh/Inch. Thickness: Min0.05mm

Permalloy wire is a soft magnetic alloy wire with exceptionally high magnetic permeability.Wire Diameter: 0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch.

Nichrome 30/20 wire is used in numerous domestic appliances, industrial resistors and furnance.Good resistance to oxidation at high temperatures

Nickel 200 Wire has good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides

FeCrAl Electric Heating Wire: Low cost, high strength at high temperature. high operating temperature, much higher melting point.

Nichrome 20/35 Strip:Outstand deformation ability, thermal stability, mechanical character,shock proof ability in thermal state and anti-oxidization

Nichrome 30/20 Strip:Outstand deformation ability, thermal stability, mechanical character,shock proof ability in thermal state and anti-oxidization

Nichrome 40/20 Strip has excellent resistance to high temperature oxidation and corrosion and good wear resistance.Thickness: Min 0.05mm

Nichrome 60/15 strip: Excellent resistance to high temperature oxidation, corrosion&good resistance. Used in Industrial Furnance.Thickness: Min 0.05mm

Nichrome 80/20 strip:excellent resistance to high temperature oxidation, corrosion & good resistance.Used in industrial furnaces Thickness:Min0.05mm

NiFe 60/40 sheet is welding wire suitable for joining & repairing all types of grey cast iron, cast iron with steel. Sheet: Thickness:0.05mm and above

Nichrome 70/30 strip: Excellent resistance to high temperature oxidation, corrosion&good resistance. Used in Industrial Furnance.Thickness: Min 0.05mm

Ni span C902 rod is attributed of negative thermoplastic coefficient, highly tough and large tensile strength offers high resistance to corrosion.

Copper Nickel Cu70/Ni30 Rod is attributed of great resistance to corrosion caused by sea water especially biofouling and impingement corrosion.

The copper nickel alloy Cu90/Ni10 Rod is attributed of excellent resistance to corrosion properties certainly in the sea water and resists the biofoul

Nickel 201 strip has a lower carbon content to prevent embrittlement by inter-granular carbon at elevated temperature