Bronze, Tin & Nickel Alloys

CuNi6 wire is Cu-Ni resistance alloy wire,this alloy has low electrical resistivity and is solderable.Diameter: 0.05mm-10mm. 0.02Inch-0.3937Inch.

Constantan wire:CuNi44 has low temperature coefficient,high electrical resistance,high ductility&non-corroding properties.Good resistance to oxidation

This alloy has very high erosion, corrosion resistance and very high weld ability.It gives the best service life under the most adverse conditions.

70/30 Copper Nickel Alloy Wire:Better Resistance to Corrosion, high resistance to sea water environments& Bio Fouling in Sea Water.Dia.0.05mm~10.00mm

Nichrome 60/15 has good deformation ability thermal stability, mechanical character, resistance to high temperature, oxidation corrosion 0.05mm-10mm

Nickel 233 sheet is a commercially pure wrought nickel alloy combining excellent corrosion resistance with high electrical and thermal conductivities.

Nickel 220 alloy sheet is very similar to Nickel 205 sheet, except with a chemical composition controlled specifically for application as cathodes.

Nickel 205 sheet (Plate) is mostly used for the anodes and grids of electronic valves, magnetostrictive transducers, lead sheets, battery cases, etc.

Pure Nickel Sheet has good resistance to corrosion in acids, alkalis and dry gases. It is most useful under reducing condition.High Purity:99.5%~99.9%

Nickel 201 is produced in wire and rod. It has mechanical properties and excellent resistance to corrosive environments with a lower carbon content.

Inconel 718 wire: Good resistance to a wide variety of corrosives, significantly better than martensitic, ferritic, and austenitic stainless steels.

Nichrome 20/25 Strip:Outstand deformation ability, thermal stability, mechanical character,shock proof ability in thermal state and anti-oxidization

Inconel 722 shares many of the same properties as other Inconel alloys
and can withstand the stress caused by several types of acids.High resistance.

Inconel 702 Sheet provides exceptional oxidation resistance from 2000°F to 2400°F and offers moderate strength ideal for combustion applications.

Inconel 722 mesh/screen demonstrates a high level of resistance to various forms of corrosion and the capacity to remain effective at high temperature

Inconel Wire 702 Mesh provides exceptional oxidation resistance from 2000°F to 2400°F and offers moderate strength ideal for combustion applications.

Inconel 722 demonstrates a high level of resistance to various forms of corrosion and the capacity to remain effective at extremely high temperature.

Inconel 702 Wire provides exceptional oxidation resistance from 2000°F to 2400°F and offers moderate strength ideal for combustion applications.

Nickel 200 with good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.

Nickel 233 wire is a commercially pure wrought nickel alloy combining excellent corrosion resistance with high electrical and thermal conductivities.