At temperatures as high as 120°F (38°C), the type 316L SS Sheets have excellent resistance to higher concentrations.Service tests are usually desirable as operating conditions and acid contaminants may significantly affect corrosion rate. Where condensation of sulfur-bearing gases occurs, these alloy 316L SS Sheets are much more resistant than other types of stainless steels. In the applications of 316L SS Sheets, however, the acid concentration has a marked influence on the rate of attack and should be carefully determined.
&&&--ONE--&&&:
&&&--ONE--&&&:
Specifications | |
Material | Type 316L SS Sheets/sheet/PLATES/plate |
Shapeform | Coil |
Preparation | Paper Interleaved Vinyl Masked |
Thickness | 20 gauge |
Thickness | 0.0355 inches |
Size | 30*Coil |
Width | 30 |
Sheet Weight Per Unit Area | 1.512 lbs/ft² |
Finish | No.2B No.3 No.4 |
Condition | Cold Rolled Annealed |
Nominal Composition | 0 to 0.25% Carbon 1.00% Max. Silicon 2.00% Max. Manganese 6 to 36% Nickel 7 to 30% Chrome |
ASM Specification | ASTM A240 ASTM A262 Prac E ASTM A480 ASTM SA-240 UNS S31603 |
&&&--TWO--&&&:
Typical Mechanical Properties | |
Steel Alloy Group | Austenitic |
Magnetic Properties | Non-Magnetic |
Harden By | Cold Work |
Corrosion Resistance | High |
Hardness | Low to Med. |
Strength | Low to Med. |
Ductility | High |
Toughness | High |
Elec.Conductance | Low |
Thermal Conductance | Low |
Thermal Expansion | High |
Heat Resistance(Scaling Strength) | High |
&&&--THREE--&&&:
Comparative Characteristics and Applications | |
Yield Strength | 45000 lbs/in² |
Tensile Strength | 18200 lbs/in² |
Elongation percent in 2 inches | 50% |
Hardness (Rockwell B) | 83 |
Creep Strength Load for 10000 Hr.with 1% Elongation at 1000°F | 25000 lbs/in² |
Creep Strength Load for 10000Hr.with 1% Elongation at 1100°F | 7900 lbs/in² |
Creep Strength Load for 10000Hr.with 1% Elongation at 1200°F | 7900 lbs/in² |
Creep Strength Load for 10000Hr.with 1% Elongation at 1300°F | 7900 lbs/in² |
Density | 0.29lbs/in² |
Modulus of Elasticity in Tension | 29.0 x 106 lbs/in² |
Specific Heat (32 to 212°F) | 0.12 BTU/ºF/lbs |
Thermal Conductivity at 212°F | 9.04 BTU/hr.ft²/ft/ºF |
Thermal Conductivity at 932°F | 12.4 BTU/hr.ft²/ft/ºF |
Mean Coefficient of Thermal Expansion per°F(32 to 212°F) | 8.8 x 10-6 ºF |
Mean Coefficient of Thermal Expansion per°F(32 to 600°F) | 9.0 x 10-6 ºF |
Mean Coefficient of Thermal Expansion per°F(32 to 1000°F) | 9.7 x 10-6 ºF |
Mean Coefficient of Thermal Expansion per°F(32 to 1200°F) | 10.3 x 10-6 ºF |
Melting Point Range | 2500 to 2550 ºF |
Electrical Resistivity | 74 µΩ.cm |
Max.Operating Temp.(Continuous Service) | 1700 ºF |
Max.Operating Temp.(Intermittent Service) | 1600 ºF |
Welding Properties | Good |
Drawing and Stamping | Good |
Hot Working-Initial Forging | 2100 to 2300 ºF |
Annealing Temp. | 1950 to 2050 ºF |
Stress Relieving Temp. | 400 to 750 ºF |
If you want more detailed information of the 316L SS Sheets or the series of stainless steel products,please feel free to contact us at any time,we will try our best.And if you need any problems that we can help,please contact us at any time,we will spare no efforts.
