NICKEL 270 WIRE
Nickel 270 Wire is supplied by Heanjia Super-metals Co. Ltd. Nickel 270 Wire is a commercially pure nickel wire and displays slight recovery hardening after annealing in the temperature range 200° to 300°C. The 30-minute recrystallization temperatures are in the range 290 to 400°C and are inversely proportional to the degree of prior cold work. Nickel 270 Wire is used for resistance thermometers, electronic cathodes or anodes, fluorescent light components.
Chemical composition of Nickel 270 Wire
Nickel | C | Cu | Fe | Co | Cr | Mn | Ti |
Balance | 0.09 max | 0.001 max | 0.005 max | 0.001 min | 0.001 max | 0.001 | 0.005 max |
Properties of Nickel 270 Wire
Density | Specific Gravity | Curie Temp | Melting Point | Electrical Resistivity | Thermal Conductivity | Specific Heat | Thermal Expansion | |
0.321 lb/cu in | 8.89 | 680°F (360°C) | 2624°F (1440°C) | 7.5 Micro-ohm-cm | 0.86 W/cm.°C | 0.108 Cal/g-°C | 7.2ppm/°F (212°F) | |
Tensile Strength | Yield Strength | Elongation | Modules of Elasticity | |||||
65ksi | 44MPa | 20ksi | 138MPa | 40 % | 30Mpsi | 207kMPa | ||
Wire Specification of Nickel 270 Wire
Wire | CNS 2962-1984 | Diameter:0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch |
Product Description of Nickel 220 Wire
The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
We can produce variety of products include strip, bar, plate, screen, wire, pipe, wire rod, mesh, netting and conveyor belt, wire and pipe and tube with high quality. We have the strong capacity of scientific research and development and can satisfy the customers' demands of the new products.
The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
We can produce variety of products include strip, bar, plate, screen, wire, pipe, wire rod, mesh, netting and conveyor belt, wire and pipe and tube with high quality. We have the strong capacity of scientific research and development and can satisfy the customers' demands of the new products.
Packing Process & Transportation of Nickel 270 Wire
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air:Beijing International Airport OR By sea:Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
Other Terms of procuring Nickel 270 Wire
Minimum Order Quantity | Manufacture Period | Payment Terms | |
50 KG | 10-15 Days (Small Quantity) | 20-40 Days (Mass Quantity) | L/C, T/T, Western Union |