XS(N)-75x30 Rubber kneader
1.Control system is adopted with PLC system
2.Hydraulic sealing structure
3.100% original
(1)Rotors made out of one piece alloy steel casting, then mixing edges surface are hard welding coating/deposits and then hardchrome deposits to maintain proper clearance between rotors & chambers for long time efficient mixing. Rotors are duly water cooled throughout and edges provided with rotary joints for efficient cooling and heating as per requirement.
2.Hydraulic sealing structure
3.100% original
(1)Rotors made out of one piece alloy steel casting, then mixing edges surface are hard welding coating/deposits and then hardchrome deposits to maintain proper clearance between rotors & chambers for long time efficient mixing. Rotors are duly water cooled throughout and edges provided with rotary joints for efficient cooling and heating as per requirement.
(2)Double jacketed main mixing chamber with exceptional heat transfer with great strength. The whole mixing area of chamber is hardened by way of hard welding deposits, then hard-chrome plated to give maximum working life for efficient mixing.
(3)End Frame: Made out of single piece casting with quick replaceable wear plates,&replaceable bearing housing assemblies.
(4)Floating Ram: Single piece alloy steel casted Double Gabble Type V.Botttom floating ram duly hard chrome plated water cooled to maintain the required temperatureof compound while mixing, actuated with high pressure pneumatic cylinder for pulling the compound into two rotors under high pressure.
(5)Drop Door Mechanism: Single piece alloy steel casted rigid drop door with hardened wedge duly hard chrome plated, water cooled to maintain required temperature of mixing, actuated with rotary actuator for efficient and quick opening and closing for discharge of compound, operated through Hydraulic Power Pack.
(6)Dust Stop Seals: Hardened surface specially designed Positive dust stop rings lubricated by high pressure grease pump for efficient sealings of fillers. This individual grease pump also feed the grease to main rotor bearings for longer working life.
(7)Feeding Door: Made out of steel actuated through pneumatic cylinder for opening & closing to ensure prevent leakage of fillers while mixing.
(8)Base plate: The machine is mounted on heavy duty base plate for vibration free operation.
(9)Drives: Heavy duty hellical hardened and ground gearbox coupled through heavy duty gear couplings with rotor shaft on output and input shaft with motor on separate base.
(10)Electric Motor: A.C. Induction Sq. case star delta or slippering motor can be provided depending upon different application. A.C. variable/ D.C. variable/ Hydraulic drive can also be supplied on request.
(11)Electric operating panel: Shall be supplied as per the suitable drive as standard.
XS(N)-75x30 Banbury Rubber Internal Mixer
Version & Parameters | XSN-35/30 | XSN-55/30 | XSN-75/30 |
Mixing capacity (L) | 35 | 55 | 75 |
Main Power(kw) | 55 | 75 | 90 |
Brake Motor (kw) | 2.2 | 3.0 | 4.0 |
Tilting angle | 1400 | 1400 | 1400 |
Air compressor (kw) | 5.5 | 7.5 | 10 |
Dust collector | HLL-10 | HLL-15 | HLL-20 |
Cooling water (MPA) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 |
Heating Steam (MPA) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 |
Electric Heater (kw) | 12 | 15 | 18 |
Overall Size L*W*H (mm) | 3200*1900*2950 | 3750*1950*3050 | 3760*2143*3050 |
Weight(kg) | 6500 | 7800 | 10500 |
XS(N)-75x30 Banbury Rubber Internal Mixer
