Brief introduction:
The SSV10 series progressive modular lube valve is used for nominal pressure 30MPa following single line lubrication machines or small grease lubrication system.
It is important to realize the distributor principle correctly is a key to guarantee distributor stable work. In actual use, we need to pay attention as follow indication:
To ensure correct installation, fittings and pipeline connections to be reliable, no leaks; element distributor in the assembly process, the environment must be kept clean and tighten with the specified tightening torque is too loose can cause leakage between the elements, tight damaged piece with the O-ring between the elements , which affects the use of the progressive block distribution.
While the block distribution is installed, it must ensure that the piston is in the horizontal position.
Specification:
Model | Nominal pressure | Oil feeding flow | Starting pressure | Outlet port | Weight |
SSV-10 | 30Mpa | 0.2 ml/Cycle | ≤1.5Mpa | 10 | 2.0kgs |
Note: Using the medium for the cone is greater than 265 (25 ℃, 150g) 1/10mm, (NLGI0 # -2 #) of the grease. Such as the use of oil, viscosity grade than N68.
Code explanation:
SSV–10–K
SSV= SSV series of progressive block distribution
10= Numbers of outlets, 8 outlet ports
K= With indicator; Without indicator if omit
SSV10 series of progressive modular lube valve dimensions:
Model | A | Max. Medium Flow Rate(ml/min) |
SSV-10 | 90 | 700 |
1.Outlet injectors : φ6 (Installed with the blocks)
2. Maximum pressure loss 10-20bar when grease through the working cell at25℃ temperature.
2. Maximum pressure loss 10-20bar when grease through the working cell at25℃ temperature.
Model SSV10 series of progressive modular lube valve description:
The grease/ oil enters into the distributor as per the direction of the arrow marked on the drawing above and transports to the end right of the piston A. The piston A moves to the left by the grease/oil pressure. The grease/oil in the position of piston A front left is transported to outlet 2 through internal passage of the house, reaches and lubricates the friction parts.
The right end passage connection of piston B is open while the piston A reaches the position of left end. The grease/oil flows into the right position of piston B and pushes the piston B moving to the left. The grease/oil store in left front of piston B is delivered to the outlet 7 through internal passage of the house.
The right end passage connection of piston C is open while the piston B reaches the position of left end. The grease/oil flows into the right position of piston C and pushes the piston C moving to the left. The grease/oil store in left front of piston C is delivered to the outlet 5 through internal passage of the house.
The right end passage connection of piston D is open while the piston D reaches the position of left end. The grease/oil flows into the right position of piston D and pushes the piston D moving to the left. The grease/oil store in left front of piston D is delivered to the outlet 3 through internal passage of the house.
The right end passage connection of piston D is open while the piston A reaches the position of left end. The grease/oil flows into the left position of piston A and pushes the piston A moving to the right. The grease/oil store in right of piston A is delivered to the outlet 1 through internal passage of the house.
When the piston B to D moves from the left to the right, according to the opposite direction above sequence of actions to complete a cycle and it will be restarting a new cycle.
When the piston B to D moves from the left to the right, according to the opposite direction above sequence of actions to complete a cycle and it will be restarting a new cycle.
