30Mn5 (1.0473) is a kind of moderate strength alloy structural steel, 30Mn5 has cold deformation plasticity, good low temperature performance, compared with the corresponding carbon content of steel, 30Mn5 has high hardenability.
30Mn5 Correspond steel:
AISI 1330,JIS SMn433,GB 30Mn2
30Mn5 chemical composition(%):
C: 0.27 ~ 0.34
Si : 0.17 ~ 0.37
Mn: 1.20 ~ 1.40
S: to allow the residual content of ≤0.035
P: allow the residual content ≤0.035
Cr: to allow the residual content of ≤0.30
Ni: to allow the residual content ≤0.30
Cu: to allow the residual content of ≤0.30
30Mn5 Mechanical Properties:
Tensile strength σb (MPa): ≥785 (80)
Yield strength σs (MPa): ≥635 (65)
Impact energy Akv (J): ≥78
Round bar : Diameter : 1mm-2000mm
Square bar :Size: 50mm * 50mm~600mm *600mm
Plate steel/flat bar :Size: Thickness: 0.1mm~800mm Width: 10mm to 1500mm
Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
Application:
30Mn5 (1.0473) is used as a small section of important fasteners can be used for frame rails, transmission gears, shafts, cold heading bolts and larger cross-section of quenched and tempered parts and mining machinery, the central strength requirements higher carburizing parts, such as cranes and other rear axle and the journal. 30Mn5 is used as a connecting rod, spindles, crankshafts, axle, joystick, fan accessories, diameter less than 15mm of cold heading various important withstand high stress bolts and other mechanical parts.
We serve you with our honesty, integrity, and professionality .
Contact sales:
Website : http://www.firsteelplate.com/
Email : seedsteel@hotmail.com
Tel : +86-371-55031185
Fax: +86-371-86220366