Hexagonal Wire Mesh
Material:
Electro Galvanized before Weaving
Electro Galvanized After Weaving
Hot Dipped Galvanized before Weaving
Hot Dipped Galvanized after Weaving
PVC Coated Before or After Weaving
Stainless Steel Wire
Galvanized Drawn Iron Wire
Weaving Style:
Straight Twist, Reverse Twist, double-direction twisted
Galvanized or PVC Coated
Width:
0.5-2m
The Common Specification of the Hexagonal Wire Mesh
Mesh | Wire Diameter | Mesh Width | |
BWG | MM | M | |
3/8" | 27-23 | 0.41-0.64 | width limit:2M,single or double edge |
1/2" | 27-22 | 0.41-0.71 | width limit:2M,single or double edge |
5/8" | 27-22 | 0.41-0.71 | width limit:1.22M,single or double edge |
3/4" | 26-20 | 0.46-0.89 | width limit:2M,single or double or strong edge |
1” | 25-19 | 0.51-1.07 | width limit:2M,straight or reversed twist |
1-1/4” | 24-18 | 0.56-1.24 | width limit:2M,straight or reversed twist |
1-1/2” | 23-16 | 0.64-1.65 | width limit:2M |
2” | 22-14 | 0.71-2.11 | width limit:2M |
3” | 21-15 | 0.81-2.11 | width limit:2M |
The Description of Galvanized Hexagonal Wire Mesh
Galvanized hexagonal wire netting | |||||
mesh | Min. Gal.v. G/SQ.M | Width | Wire Gauge (Diameter) BWG | ||
Inch | mm | Tolerance(mm) | |||
3/8" | 10mm | ±1.0 | 0.7mm - 145 | 2' - 1M | 27, 26, 25, 24, 23 |
1/2" | 13mm | ±1.5 | 0.7mm - 95 | 2' - 2M | 25, 24, 23, 22, 21 |
5/8" | 16mm | ±2.0 | 0.7mm - 70 | 2' - 2M | 27, 26, 25, 24, 23, 22 |
3/4" | 20mm | ±3.0 | 0.7mm - 55 | 2' - 2M | 25, 24, 23, 22, 21, 20, 19 |
1" | 25mm | ±3.0 | 0.9mm - 55 | 1' - 2M | 25, 24, 23, 22, 21, 20, 19, 18 |
1-1/4" | 31mm | ±4.0 | 0.9mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
1-1/2" | 40mm | ±5.0 | 1.0mm - 45 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
2" | 50mm | ±6.0 | 1.2mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
2-1/2" | 65mm | ±7.0 | 1.0mm - 30 | 1' - 2M | 21, 20, 19, 18 |
3" | 75mm | ±8.0 | 1.4mm - 30 | 2' - 2M | 20, 19, 18, 17 |
4" | 100mm | ±8.0 | 1.6mm - 30 | 2' - 2M | 19, 18, 17, 16 |
Note:
1.) The above tolerance comply with standard EN10223-2:1997;
1.) The above tolerance comply with standard EN10223-2:1997;
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.