Valves

solenoid valve is the interface between electronic controllers and pneumatic systems.

The SY Can Be Used Individually or Manifold Mounted
Long Life (Exceeding 50 Million Cycles)
Response Time 10 mSec or Less
Clean Aesthetic Design

it is for steam, high pressure medium, can work under zero pressure, is welcomed by its stable performance and long service life.

quality of ISO9001 procedures to meet world standard and internationalized specification.

Power consumption AC: 3.5VA DC : 3.0W
Protection IP65 ( DIN40050 )
Connector DIN43650C

Productivity:1000 PCS ;Min. Order:500 PCS PC;Packing:Carton;Transportation:BY AIR, BY SEA ;DeliveryDate:20 ;PaymentType:30% TT IN ADVANCE ;Trademar

solenoid valve is the interface between electronic controllers and pneumatic systems.

STEAM SOLENOID VALVES:
1) IP65
2) for hot water, steam max 180 degree C
3) SUS 304

usually an actuator, allowing a relatively small signal to control a large device.

solenoid valve
- Media: High temperature gas, Steam , Oil (below 400ºC)
--Function type: Normally Closed (N/C)
--Temperature: -5 ÷250

we supply pneumatic mechanial valve, include hand pull valve, rotary hand valve, air foot valve and exhaust valve.

2 inch plastic irrigation water solenoid valve
Medium: Water, Air,Gas
Temperature: 0~60ºC
Pressure: N/C, 0.3~8bar
Coil power: AC 6VA; DC 3W

The mainly products are Hand-control Valve,Pneumatic Control Valve,pneumatic
accessories,one-way throttles,direction valves,and so on

2 inch water solenoid valve
1)Plastic solenoid valve
2)irrigation and low power solenoid valve
Medium: Water, Air,Gas
Temperature: 0~60ºC

we specially invest and put more effort to develop air solenoid valve products and equipments to meet quality of ISO9001 procedures

high pressure solenoid valve:
1) max 12mm
2) gas, liquid
3) NC and NO.
4) brass max 60bar

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.

steam solenoid valve:
1) IP54
2) stainless steel 304 and 316
3) PTFE sealer
4) for hot water,steam

we are the professional pneumatic solenoid valve manufacturers.

it is for steam, high temperature medium, and welcomed by its stable performance and long service life.