Valves

Port Size:1/8"-1/2"
Working Medium:Air
Action Type:Internal Pilot
Working Pressure:0.15-0.8Mpa
Power:DC12V DC24 AC24V AC110V AC220V AC380V

1. 4 Main oil ports as standard type
2. With or without throttle insert option
3. With spring return or detent indicated

ISO/OEM/OD CERTIFICATION
ZERO PRESSURE LONG LIFE
COULD DESIGN AND PRODUCE AS YOUR REQUIREMENTS
GOOD QUALITY AND REASONABLE PRICE

High pressure SS304 steam solenoid valve
Medium: liquid, gas, oil
Temperature:-5~180
Mode of action: pilot operating
Working type: Normally closed

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

koganei High quality solenoid valve Long service life and stable performance is the preferred choice of customers

1. Order code: DMF-Z-25
2. Port size: 1 inch
3. Valve controlled by pulse frequency
4. Finding distributors around the world
5. Made in China

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator,

1. ISO standard mounting for Rexroth directional control valve
2. Available for Vickers (K)DG4V-3 and Denison A-3D01
3. BSPP or NPT Porting Connect

1. Herion type solenoid valve
2. 2/3, 2/5 solenoid valve
3. Original products

SMC VX2120-X64
Working medium : air,water,steam
Motion Pattern : Direct Drive
Type : Normal Close Type

miniature high pressure brass 2 way solenoid valve half inch
Media: oil, gas, liquid
Sealing material: PTFE
Mode of action: pilot operated type

koganei High quality solenoid valve Long service life and stable performance is the preferred choice of customers

1. Ordering Code: DMF-2L-B
2. Port size: 3/4
3. Long thread
4. Voltage can be DC24 and AC220V
5. Working pressure: 4-6 Bar

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.

Port Size: 1/4"
Materials: Housing: Aluminum anodized Pilot flange: plastic (POM) Seals: NBR
Wroking Pressure :1-10bar

1. Rexroth type of hydraulic manifold blocks
2. ISO standard ports for NG6, CETOP03 valves
3. Smooth plan for subplate mounting

ISO/OEM/OD CERTIFICATION
ZERO PRESSURE LONG LIFE
COULD DESIGN AND PRODUCE AS YOUR REQUIREMENTS
GOOD QUALITY AND REASONABLE PRICE

half inch miniature high pressure brass 2 way solenoid valve,
Media: oil, gas, liquid
Sealing material: PTFE
Mode of action: pilot operated type

original koganei high-end solenoid valve could take the place of SMC, airtac and various valves