Card 10/100M fast ethernet converterAvailable 3C-MC-R16M remote side , 32mm(H)x 160mm(W)x 118mm(D) ,Full/Half duplex
Function of product
10/100M Ethernet Media Converter card is the network communication device that extending the Ethernet transmission distances up to 120Km over the fibre optic cable, it can convert 10Base-T, 100Base-T Ethernet electric signal to 100Base-FX optical signal.
10/100M Ethernet Media Converter completely conforms to 10Base-T, 100Base-TX, 100Base-FX and IEEE 802.3x standards, and compatible with Network Card, Repeater, HUB and SWITCH, provides low-cost, high-reliability solutions for broadband special network and fiber metropolitan area network.
Special Feature for Product
- Supports SNMP management (only for management device)
- Enable/Disable optical link-loss alarm function
- Four transmission modes are selectable
- Comply with IEEE 802.3μ 100BASE-FX/TX, IEEE802.3 10BASE-T standard
- Comply with IEEE 802.1Q VLAN protocol
- Support 10/100M, Full/Half duplex auto-negotiation
- Support MDI/MDIX autosense
- Support transmission distance of up to 120km (Dual-fiber)
- Support over-size packets of up to 1600 Byte
- Support hot-swappable
- The cards work as standalone and rack-based Media Converters
- Single-fiber and dual-fiber devices are available
Technical Data
- Mechanical Parameters -
| Size | 32mm(H)x 160mm(W)x 118mm(D) |
| Operating temperature | 3050 |
| Storage temperature | 4070 |
| Power supply | AC220V/AC110V / DC48V/ DC24V |
-Optical Parameters
| Multimode | Fiber: 62.5/125, 50/125, 100/140μm |
| MM2km orMM5km | Output power: >18dBm |
| Receiving sensitivity: <31dBm | |
| Distance: 02km or 05km | |
| Connector: SC(standard)FC(optional) /ST(optional) | |
| Type: dual-fiber | |
| Wavelength: 850nm/1300nm/1310nm | |
| Single-mode | Fiber:9/125, 8.3/125, 8.7/125 or 10/125μm |
25km | Distance: 025km |
| Output power:-138dBm | |
| Receiving sensitivity: <34dBm | |
| Connector: SC(standard)FC(optional) /ST(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
40km | Distance: 040km |
| Output power:116dBm | |
| Receiving sensitivity: < 34dBm | |
| Connector: SC(standard)FC(optional) /ST(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
| 60km | Distance: 060km (when less than 15km, use attenuator) |
| Output power:50dBm | |
| Receiving sensitivity: < 36dBm | |
| Connector: SC(standard)FC(optional) /ST(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
| 80km | Distance: 080km (when less than 15km, use attenuator) |
| Output power:8-3dBm | |
| Receiving sensitivity: < 36dBm | |
| Connector: SC(standard)FC(optional) /ST(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
120km | Distance: 0120km (when less than 15km, use attenuator) |
| Output power:35dBm | |
| Receiving sensitivity: < 39dBm | |
| Connector: SC(standard)FC(optional) /ST(optional) | |
| Type: dual-fiber | |
| Wavelength: 1550nm |
Order information:
| 3C | - | X | X | - | X | - | X | C | - | RM16 | |
| Type | - | Datarate | Wave Length | Distance | |||||||
| WDM | 100=10/100M | 85=850nm | 20=20Km | ||||||||
| DU | 1000=10/100/1000 | 13=1310nm | 40=40Km | ||||||||
| 15=1550nm | |||||||||||
| 35=1310T/1550R | |||||||||||
| 53=1550T/1310R | |||||||||||
| 45=1490T/1550R | |||||||||||
| 54=1550T/1490R |
Remark: -R16M means this type media converter only work with 3C-MC-R16M, C means Card
